475083
35
Zoom out
Zoom in
Previous page
1/64
Next page
35 -
6 Select software type:
Select TV base software or
DVB software,
OKstart search.
The following on-screen message appears if new versions
are available.
Loading new software
New software available via search.
If both a new TV and a new DVB software are available
in the automatic search for new software versions via
satellite, you can select the software type which is to be
updated.
6Select update option:
Load new software now
Load new software after switching off to standby
(update after switching off)
Keep current software (no update desired).
OKmore or exit wizard.
OKstart software update.
A bar is displayed to inform you about the progress of the
load process. During the loading process do not switch off
your device via the power switch! This may last up to 20
minutes. You will be informed when it is finished.
At the end of loading:
Turn off the TV set off with the power switch and turn it
on again. This is unnecessary when the software is
loaded with the Load new software after switching off to
standby mode update option.
If a new software has not been updated via satellite, you
will be reminded of this several times when switching on
the set.
Software update
TV base software and DVB software
Your TV offers you the option of updating the TV base and DVB software.
The current software versions are broadcast by satellite (only via Astra1
at present) or can be installed in your set by a USB stick. Ask your dealer
about the possibility of updating the software with a USB stick.
Location of TV set UK or IRL: With the DVB software update either
MHEG-5 or DVBi3 is updated depending on the selection during the
first installation. After this update it is not possible any longer to switch
between MHEG-5 or DVBi3 software via first installation.
MHEG-5 software update only available via USB stick and DVB-T.
Automatic search for new software via satellite
If your set has a upgraded satellite tuner, it determines overnight whether
a new software version is available via satellite. However, the TV set must
remain in standby mode (do not switch off with the mains switch).
If a new software version has been found, the set informs you with an
on-screen message the next time it is switched on (see right column
– Load new software).
Manual search for new software via USB /satellite
If it is not automatically displayed that a new software is available when
switching on the set, you can also run a manual search.
The system first checks whether a software update is available on an
inserted USB stick. If not, an updater is searched for via satellite if up-
graded.
Call TV menu.
34 Select Settings,
6go to the menu line below.
34 Select Miscellaneous,
6go to the menu line below.
34 Select Software update.
OK calls software update wizard.
The software versions currently loaded in the set
are listed.
DVB
Software update
Update options
Software update wizard
A new software is available.
TV base software: current V4.3.0 new V4.4.0
Please specify whether and, if so, when you want to load the new software.
Load new software now
Load new software after switch off to standby
Keep current software
END
OK
OK
Proceed
Software update
Software type
Software update wizard
Current TV base software: V4.3.0
Current DVB software: V4.3.0
You can now search for new software. Please select the software type and
start the search with the button.
TV base software
DVB software
OK
END
OK
OK
Proceed
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Connect 37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Connect 37 in the language / languages: English as an attachment in your email.

The manual is 18,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Connect 37

Loewe Connect 37 User Manual - Dutch - 64 pages

Loewe Connect 37 User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info