Manual Loewe Connect 32 Media Full-HD+ (page 13 of 78) (English)

65312

Zoom out

Zoom in

1/78

13 -

In various countries, digital stations (DVB-T, DVB-C) are

transmitted with a preset channel number per station,

known as “Logical Channel Numbers“ – “LCN“. In this

case the preset channel numbers are adopted as station

memory locations and the stations of the preferred signal

source sorted according to LCN. There may be gaps in the

numbering of the station list depending on the LCN.

For TV sets with MHEG-5 software the stations are tied

to “Logical Channel Numbers” – “LCN” and sorted from

1-799. Digital stations without “LCN” are stored from

800 onwards. Analogue stations are stored from 1001.

If you are using an active antenna, then select yes (5V)

for the antenna power supply.

The conventional settings will be derived from the selec-

tion of set location. Only change this if you know other

symbol rates and modulation types or if you have to spec-

ify the network ID for your cable network (information

available from your cable network provider). If you want

to run the station search independently of the channel

grid, select frequency search for the search method.

State how (single satellite or type of satellite system) you

receive which satellite(s). Ask your dealer if in doubt.

Specify here whether the high band of the selected satel-

lite is to be searched in addition to the low band.

Normally, you do not need to change the values for high

and low band, unless the LNC (LNB) of your satellite

system uses a different oscillator frequency (important

for the frequency display).

After you have made these settings, you should receive

the picture and sound of the selected satellites (only with

Astra1 and HOTBIRD).

If you want to run the station search independently of

the channel grid, select frequency search for the search

method.

The symbol rates are specified by the satellite provider

and do not normally need to be changed.

Select the signal source from a list, the station of which is

to be at the top of your station list (starting with station

slot 1).

Recordings with automatic time control (see page 54) are

only possible for the respective first DVB signal source.

Initial installation

Explanations of the setting possibilities, including the upgradeable

satellite reception:

Decide how energy efficiently you want to operate your

TV set. The value for the contrast (and thus the brightness

of the background lighting) is adapted and the automatic

dimmer activated or deactivated (see page 22) depending

on the presetting.

Eco standard:

The emphasis for home use is on low energy consump-

tion. The automatic dimmer is activated.

Premium mode:

This mode optimises the settings to a brighter environ-

ment at a higher energy consumption. The automatic

dimmer is activated.

Shop mode:

The picture settings are aligned to operation in the presen-

tation room. The automatic dimmer is deactivated. If the

ambient brightness diminishes, the energy consumption

is not reduced.

The presetting can be changed later in the TV menu under

Picture  Picture adjustment  Presettings (see page 22)

or under Settings Energy efficiency.

Select the country for country-specific pre-settings.

If UK or IRL is selected for the location of TV set, it is

possible to activate MHEG-5 (UK Freeview) for the TV set.

A dialogue appears, where you can confirm to set the

operating software to the selected location.

If Yes is selected and confirmed with OK, the TV set turns

off and on again automatically. First installation starts

again after activating the operation software.

If MHEG-5 was activated, DVB-C and DVB-S can not be

used anymore. Only terrestrial/cable and DVB-T stations

are available.

Antenna/cable (analogue):

analogue stations via

cable/antenna

DVB-T: digital terrestrial stations

DVB-C: digital stations via cable

DVB-S (cable 1): digital stations via satellite

DVB-S (cable 2): digital stations via satellite

You can state whether coded stations are to be searched

for in the search/update.

Select yes to save all found

scrambled stations. However, these stations can only

be received in connection with a CA module and the

appropriate Smart Card.

Handling of the CA module is

described on page 40.

If a CA module with a SmartCard is already plugged in for

the station search, all the stations which this module can

descramble are also saved when no is preset.

Logical

Channel

Number

DVB-T:

Antenna

DVB-C:

Settings

DVB-S:

Satellite

system

High band

LNC

frequencies

Low Band /

High Band

method

Symbol rates

Favoured

signal source

Energy

efficiency

Location of

TV set

Antenna

selection

Encrypted

stations

continued on next page

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Connect 32 Media Full-HD+ in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Connect 32 Media Full-HD+

Loewe Connect 32 Media Full-HD+ User Manual - Dutch - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Loewe Connect 32 Media Full-HD+ Manual

Product: