475107
131
Zoom out
Zoom in
Previous page
1/156
Next page
131 -
english
Problem Possible cause Remedy
All menus are displayed in the wrong
language.
The menu language was set incorrectly. Set the menu language:
Press the MEDIA button in TV mode. In the MediaPortal,
highlight the last menu item (Index) in the upper half and
call up with OK. Mark the first key word and call it with
OK. Then select the language and confirm it with OK.
In the TV menu, Connections cannot be
called (displayed in grey ).
A timer recording is in progress. Wait until the timer recording ends or delete the
timer recording (page 123).
The control functions of the Loewe
Recorder and the Timer are not working
or are not working properly
a) The Digital Link function is not activated or
not possible in the recorder.
b) EURO-AV cable is not connected.
a) Activate Digital Link in the recorder (see operat-
ing instructions of the recorder).
b) Connect EURO-AV cable (page 111).
General problems when connecting
external devices via an AV input.
a) The AV standard is set incorrectly.
b) The signal type is set incorrectly.
a) Set the correct standard (page 108).
b) Set the correct signal type (page 108).
If AV standard or AV signal is set to Automatic”
then this can cause errors to be detected with
signals that do not comply with standards. In this
case standard and signal must be set according to
the information in the operating manual of the
external device.
The connection of a decoder does not
function or does not function properly.
a) The signal is not decoded because the correct
decoder stations are not selected in the menu.
b) The sound is missing in decoder mode becau-
se the wrong decoder sound is assigned in the
menu.
a) Select the right decoder stations in the menu (TV
menu ט Connections ט Miscellaneous ט Decoder
stations ט Select decoder station(s) (see page 109).
b) Select the right sound code (always, never, automa-
tic) in the menu (TV menu
ט Connections ט
Miscellaneous ט Decoder stations ט Sound encodig),
see also decoder instructions.
Digital Link Plus does not work. a) EURO-AV cable is not fully wired (pin 10 not
wired).
b) Some recorders can only adopt stations
during the initial installation of the TV set.
a) Replace the EURO-AV cable.
b) Restore the recorder to the as-delivered state
(see recorder’s operating manual).
With Teletext various characters are
displayed incorrectly.
The wrong character set has been set in the
Teletext menu.
Set the right character set: Select Teletext menu ט
Settings ט Character set ט Standard or the
appropriate character set.
Errors occurred when running a CA
module.
Switch the TV set off. Remove the CA-module from
the TV set. Wait a few seconds. Reinsert the CA-
module. Switch the TV set on again.
Troubleshooting
131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Connect 32 3D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Connect 32 3D in the language / languages: English as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Connect 32 3D

Loewe Connect 32 3D User Manual - German - 156 pages

Loewe Connect 32 3D User Manual - Dutch - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info