140195
23
Zoom out
Zoom in
Previous page
1/24
Next page
23
What to do when ...
Problem Possible cause Remedy
No picture and no sound 1.) Power cable not plugged in.
2.) Power “OFF”
3.) Defective power cable
1.) Plug the power cable fi rmly into a socket.
2.) Switch power switch “ON”.
3.) Contact your Loewe service partner.
All menus appear in the wrong language Menu language set incorrectly.
1. Press
MENU
. The “TV menu" is displayed.
2. Select “Settings” *) and press B.
3. Select the “Language” option with v / V.
4.Select the desired language with v / V.
*) last option in the menu.
Screen dark 1.) Contrast set too low
2.) No input signal, wrong input selected
1.) Set brightness and/or contrast correctly.
2.) Check the connecting cable; assign the source unit to
the right input.
Weak or overrich colours 1.) Colour not set correctly
2.) Connecting cable not connected correctly
1.) Press
and set the colour.
2.) Connect the cable correctly.
The picture is cut off in the PC mode Picture position not set correctlyt Correct the picture position with the Auto
adjust” function in the AV6-PC RGB” menu.
The picture is too large or too small Image format set incorrectly
Press
several times until the format is correct.
No sound 1.) Sound switched off
2.) Volume set to minimumt
3.) “Max. start-up volume” set to 0
Press
Press V+
Increase “Max. start-up volume” in the Sound menu.
Remote control not working properly The batteries of the remote control are used up Replace the old batteries with new ones..
Signal at V6 socket not displayed 1.) Set the phase position correctly.
2.) Check the setting of the picture width.
3.) Execute the Auto adjust” function in the AV6-PC
RGB” menu..
Horizontal stripes in TV or video signals Signal source placed in front of screen Place the signal source at the side of or behind the
screen.
Insuffi cient shielding of the video cable Only use high quality signal cables with high shield at-
tenuation.
Sound and signal parameters misadjusted
1. Press
MENU
. The “TV menu" is displayed.
2. Select “Settings” *) and press B.
3. Select the option “Call up the factory settings” with v
/ V and press OK.
The set switches automatically to standby 1.) Screen is too hot
2.) No standard input signal
1.) Improve the ventilation
2.) Standard signal at the input socket.
32241 Concept L42_Buch_GB.indd 2332241 Concept L42_Buch_GB.indd 23 11.02.2005 14:09:44 Uhr11.02.2005 14:09:44 Uhr
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe concept l 42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe concept l 42 in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe concept l 42

Loewe concept l 42 User Manual - German - 24 pages

Loewe concept l 42 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info