548809
28
Zoom out
Zoom in
Previous page
1/34
Next page
BluTechVision 3D - 28 -
Instructions for Use
Deutsch English Français Italiano Español Nederlands PortuguêsMagyar
Polski
Čeština
Problem: Possible cause Remedy
Not working at all. Mains cable not plugged in. Plug the mains cable into a socket
220-240 V 50/60 Hz.
No picture The device is not connected correctly. Make the connections as described on page
9.
The TV set is not set for the reception of DVD
signals.
Select the correct AV programme slot on the
TV set.
The video cable is not connected correctly. Check the two plugs of the cable for firm fitting
in the sockets.
The video resolution is incorrectly set. Keep the STOP button pressed down for 5
seconds. The video resolution is reset to 576p.
No sound. Faulty connections of input or output cables. Connect the cable correctly (page 9). If the prob-
lem persists, it is possible that the cables are faulty.
The volume is set at minimum. Turn up the volume.
The sound is set to mute.
Press or V + on the remote control to reac-
tivate the audio output and then set the volume
level.
Playback not possible. No disc inserted. Insert a disc.
A disc that cannot be played has been in-
serted.
Insert a playable disc. (Check the disc type, the
colour system and the regional code).
The disc is dirty. Clean the disc.
The disc is not inserted with the playback side
downwards.
Insert the disc with the play-
back side facing downwards.
The disc has not been placed in the guide. Place the disc correctly inside the guide in the
disc compartment.
A media file that is displayed cannot be
played back.
The file format is not supported. Convert the file to a supported format on a com-
puter with a converter program.
The BD-LIVE™ function is not working
properly.
The internal memory is not sufficient. Clear the internal memory (page 17) or
connect an external USB stick (>1 GB).
The Internet connection is
not working properly.
Set up the Internet connection as described
from page 16 and make sure that you have a
broadband connection.
BD-LIVE™ is deactivated. Activate the BD-LIVE™ function (page 16).
The unit is not working properly. Unplug the mains plug from the mains socket
and then try plugging it in again after 30 seconds.
The software of your Loewe TV set is
not compatible with BluTechVision 3D.
Please contact your dealer.
The remote control is not working properly.
The batteries in the remote control are dead. Replace the batteries with new ones.
n
Troubleshooting
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe BluTech Vision 3D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe BluTech Vision 3D in the language / languages: English as an attachment in your email.

The manual is 10,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe BluTech Vision 3D

Loewe BluTech Vision 3D User Manual - German - 34 pages

Loewe BluTech Vision 3D User Manual - Dutch - 34 pages

Loewe BluTech Vision 3D User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info