548809
4
Zoom out
Zoom in
Previous page
1/34
Next page
BluTechVision 3D - 4 -
Instructions for Use
Deutsch English Français Italiano Español Nederlands PortuguêsMagyar
Polski
Čeština
For your safety, and to avoid unnecessary damage to your unit,
please read and follow the safety advice below:
Intended Use and ambient conditions
This Set is intended exclusively for rendering video and audio signals
and is designed for use in residential apartments or office premises.
It must not be used in rooms with a high level of humidity (e.g. bath-
room, sauna) or a high dust concentration (e.g. workshops). The
manufacturer‘s warranty is only valid for use in the specified permis-
sible environment.
If the unit is used outdoors, make sure that it is protected from moisture
(rain, dripping water and splashing water or dew). High humidity and
dust concentrations lead to leakage currents in the device. This can
result in a shock hazard by touching it or even fire.
If you have moved the unit out of the cold into a warm environment,
leave it switched off for about an hour because of a possible formation
of condensation.
Do not place objects containing liquids on top of the unit. Protect the
device against dripping and splash-
ing water.
Candles or naked flames must be
kept away from the unit at all times
to prevent it from catching fire.
Never place the Set in a location
where it is exposed to vibrations.
This can lead to material overload.
Power supply:
Incorrect voltages can damage the unit. This device may only be con-
nected to a power supply with the voltage and frequency indicated on the
type plate using the supplied mains cable. The mains plug of the unit
must be easily accessible so that the device can be disconnected from
the mains at any time. When unplugging the unit from the mains, pull at
the connector body and not at the cable. The cables in the mains plug
could otherwise be damaged and could cause a short-circuit when
plugged in again.
Lay the mains cable so that it cannot be damaged. The power cable
may not be kinked or laid over sharp edges, stood on or exposed to
chemicals; the latter also applies to the unit as a whole. A power
cable with damaged insulation can cause electric shocks and poses
a fire risk.
Air circulation and high temperatures
Ensure that there is at least 3 cm free space on the sides and above
the set for air circulation, if the set is placed in a cabinet or on a shelf
or is hung up.
Like any electronic device, your unit requires air for cooling. Obstruc-
tion of the air circulation can cause fires.
Prevent metal items, needles, paper clips, liquids, wax, or similar
items, from getting into the interior of the device through the vent
slots in the rear panel. Such objects can cause short circuits in the
unit, which could possibly cause a fire.
If something should get into the interior of the set then immediate-
ly unplug the mains plug of the device and contact the field service
for more information.
Set-up
Place the unit on an even, firm, horizontal surface. Particularly
ensure that the set does not protrude to the front when placed in or
on pieces of furniture.
Set up the device where it is not exposed to direct sunlight and where
it is not exposed to additional heating by radiators.
The picture and sound of a TV set, a player or a radio in the vicinity
can be distorted. If this is the case, do not place the unit in the direct
vicinity of these devices.
Set up the device so that the infrared signal of the remote control can
reach the display of the player without hindrance (or if this is not
possible, see "Digital Link HD (HDMI CEC)" page 10).
Do not place any strong artificial light source in front of the unit. This
could have a detrimental effect on the infrared reception.
n
For your safety
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe BluTech Vision 3D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe BluTech Vision 3D in the language / languages: English as an attachment in your email.

The manual is 10,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe BluTech Vision 3D

Loewe BluTech Vision 3D User Manual - German - 34 pages

Loewe BluTech Vision 3D User Manual - Dutch - 34 pages

Loewe BluTech Vision 3D User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info