645576
9
Zoom out
Zoom in
Previous page
1/14
Next page
Loewe bild 1
Short-form instructions
9
english
Mounting on the table stand
For mounting the TV set on the table stand use the tool supplied (Torx
T20, Allen key SW3). The assembly steps show the device type bild
1.55. The device type bild 1.65/40/32 is assembled in the same way.
Make sure during the mounting that the TV set and table stand are
not scratched or damaged.
Follow the safety instructions when mounting in chapter For your
safety.
Delivery specification of the table stand:
(A) Table stand rotation unit with mounted cover (X)
(B) Table stand plate
(C) Countersunk screws M5x16 (4 items)
(D) M4x12 screws (4 items)
Step 1: Checking the rotation unit cover
Please check whether the cylindrical
cover (X) of rotation unit (A) is placed
in the correct position.
The pin (Y) and the centre hole (Z)
must be positioned as shown in the
adjacent figure. In this case, you can
proceed with the assembly.
Should this not be the case, please
pull off the cover (X) from the rotation
unit (A), and plug it into the correct
position again.
Step 2: Assembly of the rotation unit
Position the rotation unit (A) on the
table stand plate (B). The pin (Y) must
fit into the appropriate hole in the plate.
Use the four countersunk screws (C)
M5x16 to fasten the rotation unit (A)
on the table stand plate (B).
Tighten the screws with Allen key SW3
finger tight (torque approx. 5 Nm).
X
Z
Y
A
B
C
A
Y
3
;
Step 3: Positioning of the TV set
Position the TV set with the help of
another person on the table stand.
Make sure that the brackets (N1) and (N2)
are hooked into the slots on the TV.
Then apply slight pressure to click
bracket (N3) into place.
Step 4: Aligning and mounting the TV set
Fix the TV set using the four screws
(D) and M4x12 and Torx T20 wrench
(tighten only slightly).
Align the TV set with a spirit level. For
better protection against scratching
use a fleece as intermediate layer.
Then tighten the four screws (D).
Torque approx. 2 Nm (tighten hand-
tight).
Cable fixing
Using the Velcro cable tie supplied, you can fix the rear cables.
N1
N2
N3
D
Mounting on the table stand
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Bild 1.40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Bild 1.40 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Bild 1.40

Loewe Bild 1.40 User Manual - English - 227 pages

Loewe Bild 1.40 User Manual - German - 225 pages

Loewe Bild 1.40 Quick start guide - German - 14 pages

Loewe Bild 1.40 User Manual - Dutch - 224 pages

Loewe Bild 1.40 Quick start guide - Dutch - 14 pages

Loewe Bild 1.40 Quick start guide - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info