548740
118
Zoom out
Zoom in
Previous page
1/154
Next page
Art 40-60
User guide
118
Operation of Digital Link HD (HDMI CEC) enabled devices
For playback with an external Digital Link HD enabled device connected
to the HDMI socket of the TV set, user commands are transmitted to
the external device with a few exceptions (volume, sound on/off). You
will also be informed by an on-screen display as soon as you switch to
the corresponding HDMI input.
Pressing briefly TV switches to TV mode (back to
previous station).
Pressing TV for a longer period switches between
HDMI and TV operation.
A message on the screen informs you about the
currently selected mode.
Automatically switching off external devices
When returning to TV mode by briefly pressing the TV key (see above)
the external device can be switched off.
You can find the settings in the System settings ט Connections
טDigital Link ט Shutdown of the ext. device via TV-button.
Menu item only available if at Digital Link HD - Functionality ט
on has been selected.
Remote TV switch via Digital Link
You can select whether the TV set is to switch on automatically from
Standby mode if a disc is played or a screen menu displayed on a
Digital Link HD-enabled device.
You can find the settings in the System settings ט Connections ט
Digital Link ט Remote switch on of TV set.
Menu item only available if at Digital Link HD - Functionality ט
on has been selected.
Switching off the TV set and connected devices (system
standby)
The operation of the TV set must be enabled (see above).
Press the key long: TV set and all CEC-enabled devices
connected to the HDMI ports will be switched off to
standby (system standby).
External devices
Digital Link HD
Digital Link HD (HDMI CEC)
The Digital Link HD (HDMI CEC) system operation allows Loewe
television sets to transmit the remote control signals via the HDMI
connection of a TV set to compatible HDMI devices, such as e.g. Lo-
ewe AudioVision. You can therefore set up a concealed CEC capable
HDMI device.
Concealed installation of HDMI devices
To this end, first assign the HDMI CEC function with Code 22 to the
required device key (STB, VIDEO or AUDIO) as described in chapter
External devices, section Setting the remote control for other
Loewe devices.
Now assign the Digital Link HD function to the used HDMI device.
Assign HDMI device
The CEC capable HDMI device is connected to one
of the HDMI sockets of the TV set and switched on.
Press required button for 5 seconds.
A selection menu appears on the TV set.
 Select required device from the list.
OK Accept.
From now on, the commands of the remote control are
communicated from the TV set to the HDMI device, if
the corresponding device button (STB, VIDEO or
AUDIO) has been pressed previously.
Select HDMI device for key
No device
BluTech Vision
Select HDMI device for key Back
Cancel
118


Need help? Post your question in this forum.

Forumrules
1

Forum

loewe-art-50

Reset search

  • When switching on, it takes 3 to 4 cycles of manual switch before finally switched on Submitted on 26-2-2017 at 09:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Art 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Art 50 in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Art 50

Loewe Art 50 User Manual - German - 154 pages

Loewe Art 50 User Manual - Dutch - 46 pages

Loewe Art 50 User Manual - French - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info