645603
119
Zoom out
Zoom in
Previous page
1/144
Next page
Art 40-55
User manual
119
Teaching the remote control
Teaching the remote control
By means of key code 18 (Set-Top Box data base) your remote control
Assist may be taught for your Set-Top Box (e.g., decoder, external cable
tuner). Thus, you spare yourself the use of several remote controls.
For the use of 2-digit key codes see chapter External devices,
section Setting the remote control.
The following options are available for teach-in:
- Entering a 3-digit code number
- Read-out of the programmed Set-Top Box code
- Teaching individual keys
- Delete learned codes
In the following, the STB key is dealt with as an example since
device code 18 is preset for this key ex-works. Code 18 may also be
assigned to the VIDEO and AUDIO keys; the following description
applies accordingly.
Entering a 3-digit code number
The STB key can be programmed directly by means of a device-
dependent 3-digit code. You find a list of these codes in chapter Code
page at the end of this instruction manual.
Keep the STB and OK keys depressed for five seconds.
The LED above the STB key flashes twice.
Enter the 3-digit code from the list. The LED above the
STB key lights up for 1 second.
OK end the programming mode. After a successful
programming the LED flashes twice.
When entering a wrong code number, the LED lights
up for 2 seconds. Do this programming once again.
Read-out of the programmed Set-Top Box code
The code of the currently programmed device on the STB key can be
indicated by the remote control.
Keep the STB and OK keys depressed for five seconds.
The LED above the STB key flashes twice.
Press INFO key.
The LED above the STB key shows the programmed
code by flashing. The figure "0" will be indicated by
flashing 5 times.
Teaching individual keys
All keys (except the TV, STB, VIDEO and AUDIO device keys as well
as the V+/- keys
and ) can be taught for the operation of units
which are not contained in the integrated data base. The functions of
the selected button are then completely or partially overwritten with
the new codes.
Place the TV remote control and the remote control to be replaced
in such a way that the infrared windows face each other at a distance
of 1-5 cm (see sketch).
Keep the STB and the red key simultaneously
depressed for five seconds. The LED above the STB
key lights up permanently.
Press key to be taught on the TV remote control.
The LED above the STB key flashes.
On the original remote control press the button
which is to be taught.
The LED above the selected STB key flashes twice.
If the code is not correctly recognised, the LED above
the STB key flashes ten times. Then repeat your entry
on the original remote control. If necessary correct the
allocation of the two remote controls. Continue with
the other buttons as described above.
To end the teaching mode, press the STB key again.
After 10 seconds without an entry the teaching mode
is automatically terminated.
It is possible that not all remote control codes can
be taught.
You can make a note of the functions, which you
have allocated to the keys, on the notes pages at the
end of this instruction manual.
1-5 cm
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Art 48 - SL3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Art 48 - SL3 in the language / languages: English as an attachment in your email.

The manual is 6,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Art 48 - SL3

Loewe Art 48 - SL3 Quick start guide - English - 50 pages

Loewe Art 48 - SL3 Quick start guide - German - 50 pages

Loewe Art 48 - SL3 User Manual - German - 146 pages

Loewe Art 48 - SL3 Quick start guide - Dutch - 50 pages

Loewe Art 48 - SL3 User Manual - Dutch - 145 pages

Loewe Art 48 - SL3 Quick start guide - French - 50 pages

Loewe Art 48 - SL3 User Manual - French - 145 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info