645603
99
Zoom out
Zoom in
Previous page
1/144
Next page
Art 40-55
User manual
99
System settings
Multimedia / Network
Configuration of the built-in LAN adaptor
As network operation was selected On, wired only.
 Select type of IP configuration.
automatic
Automatic configuration of the IP address via DHCP
server or via multiple protocols according to UPnP
specification (including DHCP).
After selecting IP configuration – automatic
proceed to the network status.
manual
Enter your fixed IP addresses manually.
If manual has been selected under IP configuration:
 Enter IP, Subnet mask, Gateway and DNS server
addresses in succession with the numerical keys
on the remote control.
Proceed to network status.
You see the current network status again.
BACK: End of wizard.
IP
configuration
.
...
Networking
You can define the necessary parameters for the IP configuration yourself
("manual") or set this to be done automatically. The automatic setting occurs
through a DHCP server or by means of several protocols in accordance with the
"Universal Plug and Play" specification (UPnP)."
IP configuration
Back with Proceed with
Automatic Manual
.
...
IP address 192.168.000.123
Subnet mask 255.255.255.000
Gateway 192.168.000.100
DNS server 1 192.168.000.010
DNS server 2 192.168.001.010
Back with Proceed with
Netzworking
Manual IP configuration
Please specify the static IP address of the network adapter.
Manual IP-
configuration
Network
status
.
...
Networking
NETWORK WIZARD - Network status
Proceed with
Current settings:
Networking Wired
IP configuration Automatic
Additional information:
IP address 172.16.10.141
Subnet mask 255.255.0.0
Gateway 172.16.0.1
DNS server 1 172.16.0.1
DNS server 2 192.168.1.1
MAC address 18:16:0f:71:af:92
End with
Configuration of the built-in WLAN bridge adaptor
As network operation was selected On, wireless only.
The TV set now searches for wireless routers.
After the end of the search:
 Select a base station to which the TV shall be
connected.
OK Confirm selection and proceed to the entry of the
Wi-Fi password.
If the desired access point is not found:
 Mark Search again,
OK repeat search for wireless routers.
Or:
 Mark Enter access point manually,
OK
enter manually the SSID of the desired access
point, e.g., when the SSID of the access point is
not transferred
.
The TV set automatically detects the type of encryption
used and informs you. You will find the supported
encryption types in chapter Technical data.
If your wireless network is not encrypted: Proceed to
IP configuration.
Proceed to password entry.
Enter WLAN password.
In case of an unknown WLAN key, contact your
network administrator.
For WEP encryption
 Select the WEP index,
OK proceed to IP configuration.
 Select type of IP configuration.
For the further workflow of the network wizard
see left column under IP configuration.
Access point
selection
.
...
Networking
Please choose the access point to which the TV should connect.
Note: The newly selected parameter must be confirmed with the button.
Access point selection
Search again Enter access point manually
OK
FritzBox 7490
Netgear
Router ABC
Back with Proceed with
WPA
passphrase
.
...
Networking
The selected base station uses WPA encryption, for which a password consisting
of between 8 and 64 characters is required. Please insert it in the dialogue
below.
WPA passphrase
Back with Proceed with
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Art 48 - SL3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Art 48 - SL3 in the language / languages: English as an attachment in your email.

The manual is 6,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Art 48 - SL3

Loewe Art 48 - SL3 Quick start guide - English - 50 pages

Loewe Art 48 - SL3 Quick start guide - German - 50 pages

Loewe Art 48 - SL3 User Manual - German - 146 pages

Loewe Art 48 - SL3 Quick start guide - Dutch - 50 pages

Loewe Art 48 - SL3 User Manual - Dutch - 145 pages

Loewe Art 48 - SL3 Quick start guide - French - 50 pages

Loewe Art 48 - SL3 User Manual - French - 145 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info