Manual Load Up 77002 (page 24 of 40) (English, German, Dutch, French)

621656

Zoom out

Zoom in

1/40

Load UP

8. To interrupt the charge, disconnect in sequence:

- the supply cable

- the negative conductor (-)

- the positive conductor (+)

9.1 FIRST START UP MODEL WITH STARTER (77007)

After following all the above instructions proceed as follows:

CHARGE

1. Check that the mains voltage corresponds to the nominal one of the battery

charger indicated on the plate.

2. Disconnect the cables connected to the positive pole (+) of the battery.

3. Untie the caps of the battery and check the level of the electrolytic liquid.

4. Connect the black cable to the negative attachment of the battery charger

5. Find out the voltage of the battery to be charged (12 or 24 V) and connect the

red cable to the corresponding attachment (+12 V) or (+24 V).

6. Connect in sequence:

- the red clamp to the positive pole (+)

- the black clamp to the frame of the car, away from the battery and from the

fuel pipe.

7. Start the battery charger; check the position which the indicator of the

ampmeter will acquire.

8. Adjust the charging current with the proper switch, to max. 10% of battery

power, with a max. of 40 ampere. Concerning the positions of the switch:

- Without timer: pos.1(low), 2 (medium) and 3 (high)

- With timer: 4(low), 5 (medium) and 6 (high)

9. Connect the input cable to the mains 230 V.

10. To interrupt the charge, disconnect in sequence:

- the supply cable

- the negative conductor (-)

- the positive conductor (+)

STARTER:

1. In case of very large engines and severe weather conditions, it is advisable to

give the battery a quick charge for a few minutes before you try to jump it (see

above charging instructions).

2. Contrary to the charging operations, during the starting process the battery

must remain connected to the vehicle and the caps must remain closed.

3. N.B. Attempts of starting with the battery charger preset in the “charge”

position (pos.1-6) may damage the ampmeter and trigger the thermal

protection.

4. N.B.* The operation of the battery charger in the “START” position should

possibly occur shortly after the ignition key of the vehicle has been turned on

and be interrupted as soon as the vehicle is started; otherwise the high current

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Load Up 77002 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Load Up 77002 Manual

Product: