Manual Load Up 76005 (page 17 of 33) (English, German, Dutch, French)

621652

Zoom out

Zoom in

1/33

ENGLISH

TABLE OF CONTENTS

1.0 Attention page 15

1.1 Introduction page 15

2.0 Welding safety rules page 15

3.0 Preparation page 16

3.1 Your are now ready to weld page 16

4.0 Important - Thermostat control page 16

5.0 Some possible problems page 17

6.0 Various welding systems page 17

7.0 Graphical symbols page 17

8.0 Limitations of use page 18

9.0 Plug wiring page 18

10.0 Technical data page 19

1.0 ATTENTION

Before using your Frilass welding unit, first read this manual thoroughly, so that

accidents can be prevented.

1.1 INTRODUCTION

This instruction manual contains the information you need to prepare your arc

welding set for welding. In addition it contains trouble shooting instruction. The

instructions are not intended to show you how to be an expert welder if you have

had no 'previous experience'. Therefore, it is essential that you read very carefully

the following to get the best results and performance from your set.

It must be stressed that only with continued practice will you achieve the desired

results, arc welding is easy but demands a steady hand and time spent with scrap

metal will be rewarded with first class results on the job.

The appliance must be used only for the purpose for which it was specifically

designed. All other uses are to be considered incorrect and therefore

unreasonable. The manufacturer cannot be held responsible for any damage

resulting from improper, incorrect or unreasonable use.

2.0 WELDING SAFETY RULES

Before commencing work:

1. Ensure that you have a welding face mask with the appropriate shade lens

always ready. You must always use this as permanent eye damage can result

if you do not use appropriate protection. Check you have good ventilation and

that air can flow freely around the transformer.

2. Ensure there are no flammable or combustible materials near the work area.

3. Ensure the power supply switch on the machine is set to the correct voltage. A

protection device is fitted to prevent 400 volts being used on the 230 volt circuit.

If you use 230 volt, first remove switch knob and reposition protection plate

(model E 205 - E 260).

4. Do not open the cover of the machine. Always switch off and remove plug from

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Load Up 76005 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Load Up 76005 Manual

Product: