Manual Load Up 75051 (page 35 of 60) (English, German, Dutch, French)

621673

Zoom out

Zoom in

1/60

4. START THE GENERATING SET

Warning:

Do not hook up tools or other apparatus to the generating set before starting.

Turn the starting key to “ON” position. Now you turn the starting key to “START”.

Wenn the motor is running, you can turn the starting key to “ON” position.

Caution:

• Running the starting motor for a long time will cost the battery power greatly

even burn out the motor

• Always leave the starting key at ON position while the engine is running

BATTERY

Check the battery electrolyte level every month. Refill the distelled water until

the upper limits if the electrolyte dropped to the lower limits.

Caution:

If the electrolyte level is too low, the engine may fail to start because there is not

sufficient power. On the other side, if the electrolyte level is too high, the fluid will

corrode the surrounding parts.Do keep the electrolyte level between the upper

and lower limits.

5. OPERATE THE GENERATING SET

5.1 Operate the generating set

1. Warm up the engine without load three minutes.

2. Concerning the generating set with Low Oil Warning System, check that the

Oil Alarm Lamp is not lit.

Caution:

• For the generating set with Low Oil Warning System, the oil alarm lamp will

activated by low oil pressure or engine oil shortage, simultaneously, the

engine will stop. The engine will stop immediately if restarted without refilling

engine oil. Check the oil level and refill.

• Do not loosen or readjust either the engine speed limiting bolt or fuel injection

limiting bolt, otherwise, the performance will be affected.

5.2 Checks during the running

1. Whether there is abnormal sound or vibration;

2. Whether the engine misfires or runs rough;

3. Check the color of the exhaust. (Is it black or too white?)

If you notice any of the above-mentioned phenomenon happened, stop the

engine and find out the fault cause or contact with our agents.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Load Up 75051 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Load Up 75051 Manual

Product: