621685
32
Zoom out
Zoom in
Previous page
1/48
Next page
30
CAUTION
Substantial overloading that continuously lights the overload indicator light
(red) may damage the generator. Marginal overloading that temporarily lights
the overload indicator light (red) may shorten the service life of the generator.
Be sure that all appliances are in good working order before connecting them
to the generator. If an appliance begins to operate abnormally, becomes
sluggish, or stops suddenly, turn off the generator engine switch
immediately. Then disconnect the appliance, and examine it for signs of
malfunction.
Output and Overload Indicators
The output indicator light (green) will remain ON during normal operating
conditions.
If the generator is overloaded or if there is a short in the connected appliance,
the output indicator light (green) will go OFF, the overload indicator light (red)
will go ON and current to the connected appliance will be shut off. Stop the
engine if the overload indicator light (red) comes ON and investigate the
overload source.
Before connecting an appliance to the generator, check that it is in good
order, and that its electrical rating does not exceed that of the generator.
Then connect the power cord of the appliance, and start the engine.
NOTE:
When an electric motor is started, both the overload indicator light (red) and
the output indicator light (green) may go on simultaneously. This is normal if
the overload indicator light (red) goes off after about four (4) seconds. If the
overload indicator light (red) stays on, consult your generator dealer.
1. Connect the ground terminal.
2. Start each engine according to "STARTING THE ENGINE".
When the output indicator light (green) does not light and the overload indicator
light (red) lights instead, set the engine switch to STOP, stop the engine at once
and then start the engine again.
3. Confirm that the equipment to be used is switched off, and insert the plug of
the equipment to be used into the AC receptacle of unit A or unit B.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Load Up 75034 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Load Up 75034 in the language / languages: English, German as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Load Up 75034

Load Up 75034 User Manual - Dutch, French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info