Manual Livington M34586 MultiScrubber (page 7 of 28) (English, German, Dutch, French, Italian, Polish)

813545

Zoom out

Zoom in

1/28

ﬁrst use.

1. Remove the silicone cover from the charging socket (13) on the

motor unit (2).

2. Plug the adapter into the charging socket.

3. Plug the adapter into a functioning and easily accessible mains

socket. The indicator light (10) will light up red.

4. The indicator light ﬂashes red while charging. After 5 hours of

charging, the indicator lamp lights up red (NO longer ﬂashes) - this

indicates, that the charging process has ﬁnished.

5. First disconnect the adapter from the mains, and then from the device.

6. Place the silicone cover back into the charging socket.

ASSEMBLY

The motor unit of the Livington Multi Scrubber (2) can be used as both

a hand-held device and in combination with the telescopic pole and

frame for the motor unit (6+8).

Attaching/removing the telescopic pole with handle (#2a +#2b):

Take the telescopic pole provided and insert it into the frame of the

motor unit (6). Pay attention to the 2 side openings at the thinner end

of the telescopic pole. Allow it to audibly engage with the motor unit.

To release this connection, ﬁrmly press the two external push buttons

and pull on the ends.

You can then attach the handle to the telescopic pole. To do this,

insert the wider end of the telescopic pole into the handle, and rotate

it so that the pin meets the hole in the telescopic pole. To remove

the detachable handle, press down on the pin and pull it out of the

telescopic pole.

Attaching the motor unit:

• Place the motor unit in the frame (6). The safety lock must audibly

click into place on both the left and right sides. Make sure that it is

securely attached.

• To remove the motor unit, push the safety latch outward. This will

release the motor unit and allow it to be removed.

Attaching/removing the pad adapter and pads:

The correct structure can be found in #3 - from top to bottom:

• Motor unit (2)

• Pad adapter/attachment plate (4)

• Pad (nylon pad or microﬁbre pad - 3 or 5)

IMPORTANT INFO: THE PAD ADAPTER AND THE MICROFIBRE CLOTH

ARE ALREADY ATTACHED TO THE MOTOR UNIT AT DELIVERY!

Of course, you can separate the motor unit from the pad adapter and

then disconnect this from the pads, and put them back together again

- this is very simple:

• 6 magnets (12) are attached to the underside of the motor unit (2).

The pad adapter (4) must be attached to these magnets. Attach

the pad adapter to the motor unit. Make sure that the arrows on the

motor unit and the pad adapter are aligned and point towards each

other. The side with the Velcro fastener faces outwards.

• To remove the pad adapter from the motor unit, all you need to do

is pull on it.

Attaching/removing the cloths:

Select the desired cloth and attach it to the pad adapter using the

Velcro fastener. To remove the cloth, hold the pad adapter and gently

and slowly pull on the cloth.

Attaching/removing the optional accessories

(ATTENTION: NOT INCLUDED IN DELIVERY CONTENTS)

The brushes do not require an adapter and can simply be attached

directly to the device using the magnets, and removed in the same way.

Suitable accessories for your Livington Multi Scrubber can be

purchased at www.mediashop.tv or by calling 0800 900 88 90 (free of

charge from DE, AT + CH).

USE | Do not use the device unless it has been fully and properly

assembled. Switch oﬀ the device before attaching or removing any

accessories. Do not use the device while it is connected to the charging

adapter or mains socket. Switch oﬀ the device after each cleaning

process to maximize the operating time per battery charge.

1. Attaching the required accessories to the motor unit

2. Press the on/oﬀ switch (9) on the motor unit to switch on the

device. The holder for the accessory mounting plates (11) and the

attached pads/attachments then begins to vibrate. Move the device

over the surface to be cleaned.

3. Press the on/oﬀ switch again to switch oﬀ the device.

4. Clean the device and accessories after each use.

NOTE: Don't exert too much pressure on the device - allow the device

to do the work for you.

TIP: For stubborn dirt, you can also use a mild cleaning agent (which is

suitable for the surface that is to be cleaned). To do this, either spray

the cleaning agent directly onto the surface to be cleaned or moisten

the selected cloth of your device with it to increase the cleaning eﬀect.

CLEANING AND STORAGE

• Always make sure the device is turned oﬀ before cleaning.

• Make sure that no liquids enter the motor unit when cleaning the device.

• Never use caustic or abrasive cleaning agents. These can damage

the surfaces.

• The cloths can discolour over time. This is entirely normal, and does

not aﬀect functionality in any way. If a cloth is damaged or worn, it

should be replaced.

• If necessary, clean the motor unit (2), the telescopic pole and frame

(6+8) and the accessory pads with a damp, soft cloth. Dry with a

soft cloth.

• When washing the pads (5), pay attention to their washing labels.

Do not use any fabric softener.

• Simply shake the nylon pads (3) clean when you use them dry. If you

use them for wet cleaning, simply wash them with warm water.

TROUBLESHOOTING

If the device is not working properly, ﬁrst see if you can ﬁx the problem

yourself. If you cannot solve the problem by following the steps below,

please contact customer support.

M34586_LivingtonMultiScrubber_Manual_20230822_BS.indd 7M34586_LivingtonMultiScrubber_Manual_20230822_BS.indd 7 22.08.23 12:2122.08.23 12:21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Livington M34586 MultiScrubber in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1.81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Livington M34586 MultiScrubber Manual

Product: