813536

Livington M32172 BladeStar Manual

4
Zoom out
Zoom in
Previous page
1/12
Next page
4
5
Metallspäne von der Klinge zu entfernen. Der Messerschärfer gehört nicht in den
Geschirrspüler; nicht mit aggressiven Chemikalien reinigen.
Hergestellt in China
EN
IMPORTANT SAFETY NOTE: READ AND FOLLOW
ALL WARNINGS AND INSTRUCTIONS BEFORE USING
THIS PRODUCT. IMPROPER USE CAN LEAD TO INJURY.
WARNINGS:
• Keep out of the reach of children.
• To avoid injury, be careful when handling the blades.
• Use only on dry and flat surfaces.
• Do not force the knife blade through the knife sharpener.
ATTENTION!
• Make sure the work surface is clean, dry and level
before use. Caution should be exercised with every
use. Blunt knives can, like sharp ones, cause serious
injuries. When using the knife sharpener, always ensure
that fingers and other body parts are clear of the blade‘s
trajectory. Always clean the blade before and after use.
Not suitable for ceramic blades.
• Gauging the sharpness with your fingers may cause
unexpected cuts. To test the sharpness of the knife, use
a test material instead of your fingers.
• Keep fingers away from the blade when sharpening.
Handle sharpened knives with care, so as not to cut or
injure yourself or others.
NOT SUITABLE FOR CERAMIC KNIVES!
USE:
Setting the adjuster (#2):
1. Press the adjuster down.
2. Hold the adjuster, and press it to the desired point to select a suitable angle for your knife.
Angle recommendations:
Please note the angle recommendations for different knives, which are marked
on the knife sharpener:
Fillet knife = 16°
Kitchen knife = 16°
Universal knife = 20°
Pocket knife = 20°
Outdoor knife = 22°
Hunting knife = 22°
IMPORTANT: IF YOU ARE UNSURE WHICH ANGLE TO USE, WE RECOMMEND
USING THE 18° ANGLE.
The specified sharpening angles are provided as general
recommendations. If you are unsure, feel free to test different
sharpening angles until you find the perfect angle for your knife.
How to use the knife sharpener:
1. Place the knife sharpener on a flat/level surface (kitchen worktop or
similar). Then place one hand on the non-slip handle, while holding the knife
to be sharpened in the other hand.
2. Place the end of the blade upon the sharpening edge and keep the blade
edge perpendicular to the undersurface - ATTENTION: do not swing the knife
left or right during the process.
3. The knife sharpener has 3 openings/sharpening slots (#3):
No.1: Grinding - for the rough preliminary work, sharpening the knife .
No.2: Fine grinding - to remove any grinding residue.
No.3: Polishing and deburring
For best results, we recommend putting the knife through all 3 steps.
4. Push the knife down and pull it backwards. WARNING: Do not press down too
quickly! For best results, pull your knives in ONLY ONE DIRECTION, and
not back and forth!
5. You should pull the knife through each step a maximum of 10 times,
depending on how blunt the blade is. If your knife is particularly dull, repeat
the process until the desired result is achieved. IMPORTANT: The number of
strokes depends on the sharpness of or extent of damage to the knife)
CAUTION: Keep fingers and thumbs clear of the sharpening slots during use to
avoid serious injury.
Sharpening scissors (#4):
To sharpen scissors, insert the scissors into the scissors slot (identified
by the scissors symbol). Now push the scissor blade forward carefully,
and then pull it back as usual and repeat the process several times.
When sharpening scissors, you don‘t have to set an angle: there is only
one fixed setting.
CLEANING
During use, metal chips can accumulate on the device and the knife
you are sharpening. From time to time, wipe the knife sharpener with
a soft damp cloth to remove the chips. Also be sure to remove any
metal shavings from the blade when sharpening a knife with the knife
sharpener. The knife sharpener should not be placed in the dishwasher;
do not clean with aggressive chemicals.
Made in China
M32172_LivingtonBladeStar_Manual_A5_20220312_TC.indd 4M32172_LivingtonBladeStar_Manual_A5_20220312_TC.indd 4 13.04.22 14:1013.04.22 14:10
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Livington M32172 BladeStar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Livington M32172 BladeStar in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info