742180

Livin Flame Zurich Manual

12
Zoom out
Zoom in
Previous page
1/24
Next page
ENG-6
Maintenance
Warning: Before any maintenance and/or cleaning the exterior of the fireplace, disconnect the unit from
the power supply and leave until cooled off.
Remote Handset Battery Replacement: This remote control uses 1 CR2032 Lithium lon button cell battery
(Included). Make sure the batteries are installed correctly in the remote control.
This product does not use a standard bulb for its flame effect. The appliance uses an electronically
controlled LED system to create the effect therefore no parts need to be replaced. There are no
user-serviceable parts on this appliance. Under no circumstances should the appliance be serviced by
anyone other than a qualified electrician.
Resetting the Thermal Cutout Switch: The appliance is fitted with an Electronic Safety Control (E.S.). This is
a safety device, which switches off the fire if, for any reason, the appliance overheats, e.g. when covered. If
the heater stops operating whilst the flame effect continues normally, this indicates that the E.S. Control is
in operation. The E.S. Control can only be re-set after the appliance has cooled down, in order to re-set the
E.S. Control proceed as follows:
- Switch off the appliance (Manual On/Off switch) and leave for approximately 10-15 minutes.
- Remove any obstruction to the fan heater outlet or fan blades etc. Make sure that the power
supply is disconnected at the plug socket outlet whilst you do this.
- Switch on appliance and the E.S. Control will re-set.
- Ensure that the appliance is functioning correctly.
Cleaning the fireplace
The area around the fire should be kept free of any materials such as lint or house dust (i.e. animal hair/
carpet fibres) that could be drawn into the internal workings of the appliance and hence affect the
performance. We recommend that you clean around the fan grille housing at regular intervals. This can be
done using standard vacuum cleaner and suitable attachment. You can clean the outside of the appliance
with a suitable cloth. Do not use furniture or metal polish.
The fuelbed can be dusted as required with the appliance off.
Warning: An authorized service representative should perform any other servicing.
Warranty
Your fireplace has two year warranty against manufacturing defect, beginning at the date of purchase.
In case of a problem, contact the store that it sold to you.
Warranty will be honored when you present a dated invoice and is strictly limited to recognized faulty part.
Installation costs cannot, under any circumstance, be reimbursed for damages.
The manufacturer can’t be held responsible for direct or indirect defect consequences, either towards
person or property.
The warranty will be voided if the fireplace was misused or used for other purpose than what they were
built for. The warranty will also be voided in case of deterioration or accident that occur following neglect,
bad supervision or form altered parts.
Technical specifications
Voltage:
Heating Element:
Dimensions:
Illumination:
220V-240V~ 50Hz
1800 - 2000W
425mm H x 580mm W x 190mm D
LED system (no replaceable parts)
Gimeg Nederland Strijkviertel 27 3454 PH de Meern, The Netherlands
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Livin Flame Zurich at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Livin Flame Zurich in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info