744825

LivarnoLux HG06106C - IAN 343820 Manual

7
Zoom out
Zoom in
Previous page
1/57
Next page
SMART LIGHTING STARTER KIT
WITH COLOUR BULBS E27
Operation and safety notes
IAN 343820_2004
SMART LIGHTING STARTER KIT WITH
COLOUR BULBS E27
GB/IE/NI/MT/CY Operation and safety notes Page 3
3GB/IE/NI/MT/CY
SMART LIGHTING STARTER KIT WITH COLOUR BULBS E27
Warnings and symbols used ....................................... Page 4
Introduction .......................................................... Page 5
Intended use ......................................................... Page 5
Scope of delivery .................................................... Page 5
You will need......................................................... Page 5
Description of parts.................................................. Page 10
Technical data ........................................................ Page 12
Before first use ....................................................... Page 14
Installing and using the Gateway ................................. Page 15
Connecting the Gateway ........................................... Page 15
Installing the app . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16
Pairing Gateway and mobile device.............................. Page 17
Unpairing Gateway from mobile device ......................... Page 19
Additional functions ................................................. Page 19
Tap-to-Run / Automation ........................................... Page 25
Resetting the Gateway manually ................................. Page 32
LED signals............................................................ Page 33
Optional – Wall mounting (Gateway) ............................ Page 34
Troubleshooting...................................................... Page 35
Installing and using the RGB lamps/Remote control............ Page 37
Start-up (remote control) ........................................... Page 37
Optional – Wall bracket mounting (remote control)............ Page 37
Pairing RGB lamps and mobile device . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 38
Creating a product group .......................................... Page 39
Removing a product group......................................... Page 40
Pairing remote control and mobile device ....................... Page 40
Unpairing RGB lamps/remote control from mobile device .... Page 42
Switching on / off.................................................... Page 42
Settings ............................................................... Page 42
Time settings ......................................................... Page 47
Additional functions ................................................. Page 49
Resetting RGB lamps/remote control manually ................. Page 50
Remote control....................................................... Page 50
Troubleshooting...................................................... Page 52
Cleaning, disposal, warranty, conformity ....................... Page 53
Cleaning and care ................................................... Page 53
Disposal............................................................... Page 54
Warranty ............................................................. Page 55
Simplified EU declaration of conformity .......................... Page 56
4 GB/IE/NI/MT/CY
Warnings and symbols used
The following warnings are used in the instruction manual, quick start guide, safety instructions and
on the packaging:
DANGER! This symbol in
combination with the signal word
“Danger” marks a high-risk hazard
that if not prevented could result in
death or serious injury.
Nominal lifetime of the product.
Number of switching cycles before
premature failure.
WARNING! This symbol in
combination with the signal word
“Warning” marks a medium-risk
hazard that if not prevented could
result in death or serious injury.
Ambient temperature
Warm-up time up to 60 % of the full
light output is less than 1 second.
CAUTION! This symbol in
combination with the signal word
“Caution” marks a low-risk hazard
that if not prevented could result in
minor or moderate injury.
The product is not suitable for use in
dusty and moist conditions.
Use the product in dry indoor spaces
only.
ATTENTION! This symbol with the
signal word “Attention” indicates a
possible property damage.
Protection class II:
The power adaptor has a double
insulation.
NOTE: This symbol in combination
with “Note” provides additional useful
information.
Alternating current / voltage
Warning: Read the related safety
instructions in the user manual.
Direct current / voltage
This symbol means that the operating
instructions must be observed before
using the product.
E27
Lamp socket
Luminous flux Battery included (for remote control)
Dimmable via the app or remote
control.
Zigbee 3.0 wireless technology
5GB/IE/NI/MT/CY
Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information
concerning safety, use and disposal. Before using
the product, please familiarise yourself with all
of the safety information and instructions for use.
Only use the product as described and for the
specifi ed applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.
Intended use
The Gateway serves as a hub for communication
between your mobile device and other smart
Home devices.
The smart colour-change LED light bulb are used
for lighting up interiors.
The remote control is used to operate the smart
colour-change LED light bulbs.
Suitable Not suitable
Private use Industrial/commercial
purposes
Use in tropical climates
Any other use is considered improper. Any
claims resulting from improper use or due to
unauthorised modifi cation of the product will be
considered unwarranted. Any such use is at your
own risk.
The Lidl Home app is required to
control and set up the product.
Scope of delivery
1x Gateway
1x USB power adaptor
1x USB cable
1x Network cable
1x Mounting template (for Gateway)
1x Mounting template (for remote control)
2x Double side adhesive tape
(Remote control: Wall bracket)
1x Metal pin
3x RGB lamp
1x Remote control
1x Battery (CR2450)
1x Wall bracket
2x Dowel and screw
(Gateway)
2x Dowel and screw
(Remote control: Wall bracket)
2x Quick start guide
– Smart colour-change LED light bulbs and
remote control
– Gateway
2x Safety instructions
– Smart colour-change LED light bulbs and
remote control
– Gateway
You will need
Router:
2.4 GHz,
IEEE 802.11 b/g/n
Mobile device:
iOS 9.0 or higher
Android 5.0 or higher
Ø 5 mm /
Ø 6 mm
* for optional wall mounting
6 GB/IE/NI/MT/CY
Safety notices
BEFORE USING THE PRODUCT, PLEASE
FAMILIARISE YOURSELF WITH ALL OF THE
SAFETY INSTRUCTIONS AND INSTRUCTIONS
FOR USE! WHEN PASSING THIS PRODUCT
ON TO OTHERS, PLEASE ALSO INCLUDE ALL
THE DOCUMENTS!
m
WARNING! DANGER TO LIFE AND
RISK OF ACCIDENT FOR INFANTS
AND CHILDREN!
m
DANGER! Risk of suffocation!
Never leave children unsupervised with
the packaging material. The packaging
material poses a suffocation hazard. Children
frequently underestimate the dangers.
The packaging material is not a toy.
This product can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use of
the product in a safe way and understand the
hazards involved. Children shall not play with
the product. Cleaning and user maintenance
shall not be made by children without
supervision.
m
DANGER! Risk of electric shock! To
prevent risk of electric shock, turn off the
power at the main circuit breaker box or
disconnect the luminary from the socket-outlet
before installation.
Use in dry locations only! The product
is not suitable for use under dust and
moisture.
The increased weight may reduce the
mechanical stability of certain luminaires and
lamp holders and may impair contact making
and lamp retention.
LEDs emit bright light. Avoid looking directly
into the light source for prolonged periods.
The LED(s) is/are not replaceable.
This product is suitable for indoor use
only and not for areas constantly subject
to moisture, such as bathrooms.
m
WARNING! Risk of electric shock!
Do not drill into any pipes or mains cables
beneath the mounting surface. Use a voltage/
metal detector.
Safety notices for the
Gateway
Electrical safety
m
WARNING! Risk of electric shock!
The product must be checked for damage
before use. A defective or damaged product
must not be put into operation.
Do not use the product if it has been dropped.
Disconnect the power adaptor from the
power supply and contact your retailer
(see “Service”) if it is damaged.
7GB/IE/NI/MT/CY
This product does not contain any parts which
can be serviced by the user.
Do not attempt to repair the product yourself.
In case of mal function, repairs are to be
conducted by qualified personnel only.
Do not open the power adaptor casing under
any circumstances. Do not insert any objects
into the inside of the casing.
Only use this product with the supplied power
adaptor.
Before connecting the power adaptor to the
power supply, check that the voltage and
current rating corresponds with the power
supply details shown on the power adaptor
rating label.
To avoid damaging the cord, do not squeeze,
bend or chafe it on sharp edges. Keep the
cord away from hot surfaces and open flames
as well.
Lay out cords in such a way that no
unintentional pulling or tripping over is
possible.
Keep the power adaptor and its cord out of
reach of children.
Disconnect the power adaptor from the power
supply when not in use and before cleaning.
During cleaning or operation, do not immerse
the electrical parts of the Gateway and the
power adaptor in water or other liquids.
Never hold the Gateway and the power
adaptor under running water.
If smoke or unusual sounds are observed,
immediately unplug the power adaptor from
the power supply. Have the product and the
power adaptor checked by a specialist before
using it again.
Never touch the power adaptor with wet
hands.
The product and the power adaptor shall not
be exposed to dripping or splashing water.
Power adaptor and Gateway shall not be
covered.
m
ATTENTION! Risk of property
damage!
When disconnecting the power adaptor from
the mains, pull the power supply and not the
cord.
The power adaptor consumes a small amount
of energy as long as it is connected to a
socket-outlet. In order to switch off the power
adaptor completely, it must be disconnected
from the socket-outlet.
The socket-outlet must remain freely accessible
at all times.
Installation location and operating
environment
m
ATTENTION! Risk of property
damage!
Do not place burning candles or other open
fire on or next to the product.
Sudden temperature changes may cause
condensation inside the product. In this case,
allow the product to acclimate for some time
before using it again to prevent short circuits!
Do not operate the product near heat sources,
e.g. radiators or other devices emitting heat!
The Gateway must not be operated near
sources of high-frequency or magnetic
interference.
Do not expose the product to direct sunlight.
Observe the operating temperature and
operating humidity (see “Technical data”).
8 GB/IE/NI/MT/CY
Wireless data transmission
m
WARNING – Radio interference
Switch the product off on airplanes, in
hospitals, service rooms, or near medical
electronic systems. The wireless signals
transmitted could impact the functionality of
sensitive electronics.
Keep the product at least 20 cm from
pacemakers or implantable cardioverter
defibrillators, as the electromagnetic radiation
may impair the functionality of pacemakers.
The radio waves transmitted could cause
interference in hearing aids.
Do not place the product near flammable
gasses or potentially explosives areas (e. g.
paint shops) with the wireless components
on, as the radio waves emitted can cause
explosions and fire. The range of the radio
waves varies by environmental conditions.
In the event of wireless data transmission,
unauthorised third parties receiving the data
cannot be excluded.
Operating system updates
In order to keep the product up to date, it is
necessary that you always keep the operating
system of your smartphone and/or tablet PC
up to date.
Update the operating system regularly.
Storage
m
ATTENTION!
Disconnect the USB power adaptor
[] from
the power supply if the product is not going to
be used for a longer period of time.
When not in use, store the product in its
original packaging.
Store the product in a dry, secure location
away from children.
Safety instructions for
batteries / rechargeable
batteries
m
DANGER TO LIFE! Keep batteries /
rechargeable batteries out of reach of
children. If accidentally swallowed seek
immediate medical attention.
Swallowing may lead to burns, perforation of
soft tissue, and death. Severe burns can occur
within 2 hours of ingestion.
DANGER OF EXPLOSION! Never
recharge non-rechargeable batteries. Do
not short-circuit batteries / rechargeable
batteries and / or open them. Overheating, fire or
bursting can be the result.
Never throw batteries / rechargeable
batteries into fire or water.
Do not exert mechanical loads to batteries /
rechargeable batteries.
9GB/IE/NI/MT/CY
Risk of leakage of batteries /
rechargeable batteries
Avoid extreme environmental conditions and
temperatures, which could affect batteries /
rechargeable batteries, e.g. radiators / direct
sunlight.
If batteries / rechargeable batteries have
leaked, avoid contact with skin, eyes and
mucous membranes with the chemicals! Flush
immediately the affected areas with fresh
water and seek medical attention!
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries /
rechargeable batteries can cause burns
on contact with the skin. Wear suitable protective
gloves at all times if such an event occurs.
In the event of a leakage of batteries /
rechargeable batteries, immediately remove
them from the product to prevent damage.
Remove batteries / rechargeable batteries
if the product will not be used for a longer
period.
Risk of damage of the product
Only use the specified type of battery /
rechargeable battery!
Insert batteries / rechargeable batteries
according to polarity marks (+) and (–) on
the battery / rechargeable battery and the
product.
Use a dry lint-free cloth or cotton swab
to clean the contacts on the battery /
rechargeable battery and in the battery
compartment before inserting!
Remove exhausted batteries / rechargeable
batteries from the product immediately.
Notes for coin / button cell
batteries
WARNING! Do not ingest the battery,
chemical burn hazard.
The remote control supplied with this product
contains a coin / button cell battery. If a
coin / button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and
can lead to death.
Keep new and used batteries away
from children.
If the battery compartment does not close
securely, stop using the product and keep it
away from children.
If you think batteries might have been
swallowed or placed inside any part of the
body, seek immediate medical attention.
10 GB/IE/NI/MT/CY
Description of parts
x 3
A B
10 811 9
432
13 12
5 6
1
x 2
7
[1] RGB lamp
[2] button ( On / Toggle colour
temperature:
warm white,
medium warm white,
medium cool white,
cool white)
[3] button ( Off)
[4] LED
[5] Double-sided adhesive tape
[6] Wall bracket
[7] Screws/Dowels (x 2 sets)
[8] Wall mounting hole
[9] Battery compartment
[] Battery compartment cover
[] button (reduce brightness)
[] Remote control
[] button (increase brightness)
Not illustrated:
[] Mounting template (for remote control)
Quick start guide (x 2)
Safety instructions (x 2)
11GB/IE/NI/MT/CY
C
1615
17
POWER DC5V 1A
RESET
LAN
20
Status
LAN
18
19
[] LED Status
[] LED LAN
[] RESET button (reset and pairing)
[] LAN port (RJ45 Ethernet)
[] Micro USB port POWER DC5V 1A
[] Wall mounting hole
(back side, not illustrated)
D
21
23
22
24
25262728
HG06322
HG06322-BS
29
[] Network cable
[] USB type A plug
[] USB cable
[] Micro USB plug
[] Metal pin
[] Screw (x2)
[] Dowel (x2)
[] Mounting template
[] USB power adaptor
12 GB/IE/NI/MT/CY
Technical data
RGB lamps (Model: HG06106C)
Rated power 9 W
Lamp socket E27
Total luminous flux (6500 K) 806 lm
Measurements (mm) (Ø x L) 60 x 115
Operating voltage 230 V
~
, 50 Hz
Frequency band 2.4 to 2.485 GHz
Max. transmitted power 13 dBm
Life 30000 h
Switching cycles (on/off) 100000
Communication protocol ZigBee 3.0
Reception range approx. 70 m (free area)
Operating temperature –10 to +40 °C
Operating humidity 10 to 80 %
Colour temperature 2200 to 6500 K
Colour rendering index R
a
> 95
Brightness control Dimmable via the app or remote control
Warm-up time (60 %) < 1 s = 60 % light
Remote control (Model: HG06323)
Operating voltage 1 x 3 V
Lithium battery (CR2450)
Communication protocol ZigBee 3.0
Reception range approx. 70 m (free area)
Operating temperature +5 to +35 °C
Operating humidity 10 to 80 %
Frequency band 2.4 to 2.485 GHz
Max. transmitted power 13 dBm
13GB/IE/NI/MT/CY
Gateway
(Model: HG06322, HG06322-BS)
USB input voltage/current 5 V
, 1 A
Frequency band 2.4 to 2.485 GHz
Max. transmitted power 13 dBm
Communication protocol ZigBee 3.0
Reception range/angle approx. 70 m/360° (free area)
Operating temperature +5 to +35 °C
Operating humidity 10 to 70 %
Storage temperature 0 to +45 °C
Measurements approx. 89 x 89 x 23.5 mm
Weight approx. 78 g
Supported operating systems iOS 9.0 or higher
Android 5.0 or higher
USB power adaptor
(Model: K05S050100G, K05S050100B)
Importer OWIM GmbH & Co. KG
District court Stuttgart: HRA 721742
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Manufacturer Dongguan Guanjin Electronics Technology Co., Ltd.
Model identifier EU version: K05S050100G
UK version: K05S050100B
Input voltage 100–240 V∼
Input AC frequency 50/60 Hz
Input current 0.2 A
Output voltage 5.0 V
Output current 1.0 A
Output power 5.0 W
Average active efficiency 73.7 %
No-load power consumption 0.05 W
Protection class II
Operating temperature +5 to +35 °C
Operating humidity 10 to 70 %
Storage temperature 0 to +45 °C
14 GB/IE/NI/MT/CY
kWh/1000h
Y IJA
IE IA
A
++
A
+
A
B
C
D
E
A
+
9
Detailed information on the Ecodesign Directive
(ErP) can be found at www.owim.com.
Trademark notices
iOS and Apple are registered trademarks of
Apple Inc. in the USA and other countries.
App Store is a registered trademark of
Apple Inc.
Android, Gmail, Google Play and Google
Assistant* are registered trademarks of
Google Inc.
Windows and Windows 7 / 8 / 10 / XP
are registered trademarks of Microsoft
Corporation in the USA and other countries.
Zigbee is a registered trademark of The
Zigbee Alliance.
USB
®
is a registered trademark of
USB Implementers Forum, Inc.
The LIVARNOLUX trademark and trade
name is the property of their respective
owners.
Any other names and products may be
trademarks or registered trademarks of their
respective owners.
* Google Assistant is not available in certain
languages and countries.
Before first use
Remove the packaging material. Check if all
parts are complete.
15GB/IE/NI/MT/CY
Installing and using the Gateway
Connecting the Gateway
Fig. E:
E
WiFi router (not included)
HG06322-BS
HG06322
21
29
22
24
18
19
1. Connect LAN port [ ] to WiFi router (not
included) via network cable
[ ] .
2. Connect Micro USB plug
[ ] to Micro USB
port
[ ] .
3. Connect USB type A plug
[ ] to USB power
adaptor
[ ] .
4. Connect USB power adaptor
[ ] to socket-
outlet.
5. LED LAN
[ ] lights up.
The Lidl Home app is required
to control and set up the product
(see “Installing the app“).
Important: Your mobile device needs to
be connected to the WiFi router’s wireless
network to perform the installation.
16 GB/IE/NI/MT/CY
Installing the app
NOTES:
Download and install the Lidl Home app
from the Apple App Store or Google Play
Store.
Lidl Home is available in multiple
languages. The language is automatically
adjusted to the language settings of your
mobile device. English is used if your
language is not available.
Screenshots are from the iOS 13.3 app
version (if not otherwise marked). Older iOS
versions may have functional limitations.
The Android version of the app follows the
same principles as the iOS version; you might
encounter discrepancies between the two
platforms, such as slightly different on-screen
commands or icons.
Updating the firmware might result in changes
to the app’s functionality.
Heed the notifications in the app when
installing and pairing the product.
An updated instruction manual can be found
here:
{
Me
}
tab:
Tap
{
User Manual
}
.
Preparation
1. Open Lidl Home.
2. Lidl Home may ask for permission to send
notifications
(
: Optional, depending on the mobile
device settings).
3.
{
Register
}
4. Agree to privacy policy.
(iOS + Android)
5.
{
Register
}
:
– If the preselected country does not match
your residence, tap
{
>
}
. A list of countries
will be displayed. Scroll down the list and
tap the name of the country you reside in.
To reach the entry faster, type the name
of your country in the search box or tap
on the initial letter on the right side of the
screen.
– Enter email address.
– Agree to service agreement and privacy
policy (tap small box
).
17GB/IE/NI/MT/CY
The app and the product can only be used
if you have fully understood the service
agreement and the privacy policy and give
your consent.
– Tap
{
Get Verification Code
}
. You will
then receive an email with a verification
code.
6. Enter email verification code.
7. To secure your privacy, it is necessary to set
a password. Your password must meet the
following requirements:
– 10 to 20 characters
– min. 1 upper-case letter
– min. 1 lower-case letter
– min. 1 digit
– min. 1 special character
Keep the password in a safe place in case
you need it in the future.
8.
{
Done
}
9. Lidl Home may ask for permission to access
the location when using the app.
Optional, depending on the mobile device
settings. Permission is required to display
weather information in the app.
10. Installation complete.
Having problems with the
installation?
Various issues may cause the installation to fail,
for example:
Settings of the mobile device
Functional limitations of older app versions
Consult the “Troubleshooting” section.
Pairing Gateway and mobile
device
1. Open Lidl Home.
(iOS + Android)
18 GB/IE/NI/MT/CY
2.
{
Home
}
tab:
Select:
–
{
Add Device
}
or
–
(add further devices)
(iOS)
3. Select category
{
Gateway
}
.
4. Select:
– iOS:
{
Gateway
}
– Android:
{
Gateway
}
Keep your mobile device close to the
Gateway while pairing.
5. Check if LEDs Status
[] and LAN [] light
up.
6. Follow the App instructions.
7. Establishing connection.
(iOS)
8. Optional: Tap
and rename the product.
9.
{
Done
}
.
Pairing completed.
Renaming product and setting location
(Android)
(iOS + Android)
1. Tap
.
Tap
{
ZigBee Gateway
}
.
19GB/IE/NI/MT/CY
(iOS + Android)
2. Rename the product and set its location.
3.
{
Save
}
.
Pairing completed.
After pairing (iOS/Android)
Additional smart Home devices can be
added (see operating instructions of the
smart Home device that you would like to
install).
Unpairing Gateway from
mobile device
1. Open Lidl Home.
2.
{
Home
}
tab:
Tap
{
ZigBee Gateway
}
(or previously
selected device name).
3. Tap
(top right).
4. Tap
{
Remove Device
}
Select:
–
{
Disconnect
}
–
{
Disconnect and wipe data
}
( “Additional functions”).
5.
{
Confirm
}
Additional functions
Optional settings
1.
{
Home
}
tab:
Tap
{
ZigBee Gateway
}
.
2. Tap
(top right).
(iOS)
3. Tap
.
Select:
–
{
Icon
}
:
*
{
Take Photo
}
or
*
{
Select from Album
}
–
{
Name
}
:
Rename product.
–
{
Location
}
:
** Assign a room to the product.
*
Access to the mobile devices’
camera and photo library is
required.
**
To assign a room to the product, you
first need to add rooms
(
“General”,
{
Home Management
}
).
4.
{
Device Information
}
:
Virtual ID, IP address, MAC address and
product’s time zone are displayed.
20 GB/IE/NI/MT/CY
5.
{
Offline Notification
}
:
A notification is sent when the product is
offline for more than 30 minutes.
Offline notification on: Tap
.
Offline notification off: Tap
.
(iOS)
6.
{
Share Device
}
:
Share access to the product with other family
members.
To use this function, you first need to
create a user group (family) (
“General”,
{
Home Management
}
).
7.
{
FAQ
}
:
Check FAQ related to the product.
8.
{
Check for Firmware Upgrade
}
:
Display the WiFi and ZigBee modules’
firmware version and check for firmware
upgrade.
9.
{
Remove Device
}
:
Select:
–
{
Disconnect
}
Remove product from the app. Data
remaining the product’s memory.
This operation only resets the product to
offline mode and starts the pairing mode.
If you want to remove all data of the
product and the cloud, read the following
point.
–
{
Disconnect and wipe data
}
Reset to factory settings.
This function deletes all data from the
product and in the cloud.
Use this function if you pass on,
dispose of or return the product to the
manufacturer.
Make sure that all data on the product
and in the cloud has been deleted.
Follow the instructions in the app.
or
–
{
Cancel
}
Cancel removing the product.
21GB/IE/NI/MT/CY
General
{
Smart
}
tab:
{
Tap-to-Run
}
tab:
The product offers the possibility to control
several smart Home devices with one click
or with a smart speaker via voice command.
{
Automation
}
tab:
Set your smart Home devices to perform
certain actions at certain times of day under
certain conditions.
{
Me
}
tab:
John.Smith@impala.com.hk
(iOS)
Tap the top of the screen to select a new
profile picture and user name, to manage
your user account and to select the
temperature unit/time zone.
A blue dot in the app indicates new
notifications.
{
Me
}
tab:
{
Home Management
}
:
Create a user group.
(iOS)
1. Enter family name (or user group name).
2. Set location and tap
{
OK
}
.
Optional. Location is required to display
weather information in the app.
The location is determined automatically. If
the location cannot be determined, you can
roughly determine it by moving the map so
that your place of residence is displayed in
the centre.
3. Select rooms with smart Home devices.
= selected rooms.
Add additional rooms at bottom of list.
22 GB/IE/NI/MT/CY
4.
{
Save
}
5. Select:
–
{
View Family
}
–
{
Done
}
6. After creating the family in the app, tap
{
Home Management
}
again.
(iOS)
7. Tap family name.
Newcastle
(iOS)
Change the name and location of the family,
if desired.
{
Room Management
}
: Assign your
smart Home devices to other rooms or
delete rooms from the list, if desired.
– Tap room name.
(iOS)
– smart Home devices that have already
been assigned to the room are shown in
the upper area.
– smart Home devices that have not been
assigned to the selected room are shown in
the lower area.
– Remove device from room:
Tap
and then
{
Delete
}
.
– Assign device to room:
Tap
.
– Change displayed sequence:
Tap
and at the same time drag the
device to the desired position in the list.
– Tap
{
Save
}
.
–
{
Add Room
}
:
Enter room name and then tap
{
Save
}
.
– Delete rooms from list:
Tap
(top right).
Tap
and then
{
Delete
}
.
Tap
{
Done
}
.
23GB/IE/NI/MT/CY
John.Smith@impala.com.hk
John Smith
(iOS)
{
Add member
}
: Enter name, country/
region, email address and assign a family
role (administrator or common member) and
then tap
{
Save
}
.
The new member must have registered with
Lidl Home before.
Tap a family member to change name, to
grant/revoke administrator rights or to remove
this member from the user group.
{
Delete Home
}
: Delete home from app.
8.
{
Add Family
}
: Create additional families in
the app.
{
Me
}
tab:
{
Message Center
}
:
(iOS)
tab:
Notification if one of your smart Home
devices has triggered an alarm (e.g. motion
sensor has been triggered).
tab:
Notifications about family members’ activities.
tab:
General messages, e.g. if a mobile device
logs in to your user account.
tab:
Enable/disable all notifications or single
notification types.
Define time segments in which you do not
want to receive alarms.
{
Me
}
tab:
{
Help Center
}
:
FAQ (Frequently Asked Questions).
{
All
}
tab:
Specific troubleshooting tips for individual
smart Home devices.
24 GB/IE/NI/MT/CY
{
Me
}
tab:
{
Settings
}
:
(iOS)
Activate/deactivate tones and notifications,
retrieve software information, start a network
diagnosis, clear the cache and log out of the
app.
{
Me
}
tab:
(iOS)
{
Privacy Policy
}
:
Our complete privacy policy is available
here.
{
Me
}
tab:
{
User Manual
}
:
{
Home
}
tab:
After you have created a family (user group),
the following information appears:
(iOS + Android)
Tap on the weather icon to display more
weather data. If desired, change temperature,
barometric pressure and wind speed units.
{
...
}
:
– Select list view or grid view.
– Change displayed sequence of
smart Home devices.
– Manage rooms.
25GB/IE/NI/MT/CY
Tap-to-Run / Automation
The app offers the possibility to integrate the
product together with other smart Home
devices in user-defined scenarios and automatic
actions.
{
Smart
}
tab:
(iOS)
Tap-to-Run
Control several smart Home devices with
one click or with a smart speaker via voice
command.
Settings
{
Tap-to-Run
}
tab:
1. Tap
.
(iOS)
2. Tap
{
Launch Tap To Run
}
.
26 GB/IE/NI/MT/CY
(iOS)
Set a delay before you set the device
function(s). The delay must not be the last
entry in the task list. If the device functions are
supposed to be executed immediately after
clicking, skip the menu item
{
Time-lapse
}
.
{
Time-lapse
}
:
– Optional. Set hours, minutes, and seconds
to execute the selected functions delayed
after clicking.
–
{
Next
}
–
{
Task
}
{
Run the device
}
:
– Select smart Home device.
– Select and set function.
–
{
Save
}
–
{
Next
}
–
{
Task
}
– Select further devices and set their
functions.
{
Select Smart
}
:
–
{
Enable or Disable Automation
}
:
Select automatic action (only available,
if an automatic action was previously
created, see “Automation”).
3. Tap
{
Name
}
.
– Optional. Edit name (e.g. Lamps & Sockets
ON).
–
{
Save
}
4. Tap
{
Style
}
.
– Optional. Select colour, icon, and image.
5.
{
Show on Home Page
}
:
–
: Scenario will be displayed under the
{
Home
}
tab.
–
: Scenario will not be displayed under
the
{
Home
}
tab.
6.
{
Save
}
27GB/IE/NI/MT/CY
Execute
{
Smart
}
tab:
{
Tap-to-Run
}
tab:
(iOS)
1. Tap scenario.
2.
{
OK
}
{
Home
}
tab:
(iOS)
1. Tap scenario.
2.
{
OK
}
Edit/Delete
{
Smart
}
tab:
{
Tap-to-Run
}
tab:
1. Tap
{
...
}
on the scenario button.
2. Edit: Tap task, name, or style and make
changes.
(iOS)
3. Change displayed sequence:
– Swipe task to the left.
–
{
More
}
– Tap . At the same time drag the task to
the desired position in the list.
–
{
Done
}
–
{
Save
}
28 GB/IE/NI/MT/CY
4. Delete single task:
– Swipe task to the left.
–
{
Delete
}
–
{
Save
}
5. Delete complete scenario:
–
{
Delete
}
(bottom of the screen)
–
{
OK
}
Scenario management
{
Smart
}
tab:
{
Tap-to-Run
}
tab:
1. Tap
{
...
}
(below ).
2. Tap
{
Manage
}
.
(iOS)
3. Change displayed sequence:
Tap
and at the same time drag the
scenario to the desired position in the list.
4. Delete scenario:
– Tap
and then
{
Delete
}
.
–
{
OK
}
–
{
Done
}
Automation
Let your smart Home devices perform
certain actions at certain times of day under
certain conditions.
Settings
{
Automation
}
tab:
1. Tap
.
(iOS)
Set conditions before you set the actions
(tasks) the device is supposed to execute.
Conditions can only be added afterwards, if
a condition has already been set before.
If you do not set any condition, but tap
{
Launch Tap to Run
}
instead, the action
(task) will be saved as a scenario under the
{
Tap-to-Run
}
tab. In such case, the action
(task) can only be activated manually by
clicking (see “Tap-to-Run”).
29GB/IE/NI/MT/CY
2. Add conditions
{
When weather change
}
–
{
Temperature
}
Optional: Select location.
Select:
{
<
}
(smaller than)
{
=
}
(equals)
{
>
}
(bigger than)
Set temperature.
{
Next
}
–
{
Humidity
}
Optional: Select location.
Select:
{
Dry
}
(0 to 40 %)
{
Comfortable
}
(40 to 70 %)
{
Moist
}
(70 to 100 %).
{
Next
}
–
{
Weather
}
Optional: Select location.
Select:
{
Sunny
}
{
Cloudy
}
{
Rainy
}
{
Snowy
}
{
Haze
}
{
Next
}
–
{
Sunset/Sunrise
}
Optional: Select location.
Select:
{
Sunrise
}
{
Sunset
}
–
{
Next
}
–
{
Wind Speed
}
Optional: Select location.
Select:
{
<
}
(smaller than)
{
=
}
(equals)
{
>
}
(bigger than)
Set wind speed.
{
Next
}
–
{
Schedule
}
–
{
Repeat
}
:
Select weekday(s).
–
{
<
}
– Set execution time.
–
{
Next
}
{
When device status changes
}
– Select smart Home device.
– Select function.
3. Add action (task)
Set a delay before you set the device
function(s). The delay must not be the last
entry in the task list. If the device functions are
supposed to be executed immediately after
the conditions are met, skip the menu item
{
Time-lapse
}
.
{
Time-lapse
}
:
– Optional. Set hours, minutes, and seconds
to execute the selected functions delayed
after the conditions are met.
{
Next
}
{
Run the device
}
:
– Select smart Home device.
– Select and set function.
–
{
Save
}
–
{
Next
}
30 GB/IE/NI/MT/CY
(iOS)
{
Select Smart
}
:
–
{
Execute Scenario
}
:
Select scenario (only available, if a
scenario was previously created, see “Tap-
to-Run”).
–
{
Next
}
–
{
Enable or Disable Automation
}
:
Select automatic action (only available, if
another automatic action was previously
created).
{
Next
}
{
Send notification
}
:
– Select notification method.
{
Next
}
4. Add conditions or tasks:
{
Condition
}
– see “Add conditions”
{
Task
}
– see “Add action (task)”
5. Select condition type under
{
Condition
}
:
(iOS)
–
{
All Conditions Are Met
}
–
{
Any Condition Is Met
}
6. Tap
{
Name
}
.
– Optional. Edit name.
–
{
Save
}
7. Tap
{
Style
}
.
– Optional. Select colour and image.
8. Tap
{
Effective Period
}
.
– Select city.
–
{
OK
}
– Select:
{
All-day
}
{
Daytime
}
{
Night
}
{
Custom
}
(set start and end and confirm with
{
OK
}
)
31GB/IE/NI/MT/CY
–
{
Repeat
}
:
Select weekday(s).
–
{
<
}
–
{
Next
}
9.
{
Save
}
10. Select whether the automatic action just
created should be activated directly or should
remain deactivated for the time being.
– Activated:
{
Yes
}
– Deactivated:
{
No
}
Activate/Deactivate
{
Smart
}
tab:
{
Automation
}
tab:
(iOS)
: activated
: deactivated
Edit/Delete
{
Smart
}
tab:
{
Automation
}
tab:
1. Tap
{
...
}
on the automation button.
2. Edit: Tap condition, task, name, style, or
effective period and make changes.
(iOS)
3. Delete single condition or task:
– Swipe condition or task to the left.
–
{
Delete
}
–
{
Save
}
32 GB/IE/NI/MT/CY
4. Change displayed sequence (tasks only):
– Swipe task to the left.
–
{
More
}
– Tap and at the same time drag the task
to the desired position in the list.
–
{
Done
}
–
{
Save
}
5. Delete complete automatic action:
–
{
Delete
}
(bottom of the screen)
–
{
OK
}
Automation management
{
Smart
}
tab:
{
Automation
}
tab:
1. Tap
{
...
}
(below ).
2. Tap
{
Manage
}
.
(iOS)
3. Change displayed sequence:
Tap
and at the same time drag the
automatic action to the desired position in the
list.
4. Delete automatic action:
– Tap
and then
{
Delete
}
.
–
{
OK
}
–
{
Done
}
Resetting the Gateway
manually
Tool: []
1. Press and hold RESET [] for ≥ 5 s.
2. Status
[] lights up = Reset done.
This function only resets the data which is
stored in the local memory of the product. If
you want to reset the cloud memory as well,
perform a reset via the app (see “Additional
functions”,
{
Disconnect and wipe data
}
).
33GB/IE/NI/MT/CY
LED signals
LED Meaning
Status
[]
The product has not been activated yet.
The product has been successfully added to an app user account.
The product is not supplied with power.
Reset successful.
The product is ready for pairing after a reset.
LAN
[]
The network cable [] is connected.
The network cable [] is not connected.
The product is not supplied with power.
Data is being transferred.
Explanation of symbols
LED off
LED on LED flashing
34 GB/IE/NI/MT/CY
Optional – Wall mounting (Gateway)
m
WARNING! Risk of electric shock! Do not drill into any pipes or mains cables beneath the
mounting surface. Use a voltage/metal detector.
F
Ø 6 mm
28 27 26
Remove the protective foil from the
adhesive tape on the back of the mounting
template
[].
Stick the mounting template
[] to the desired
position.
Drill 2 holes on the marked positions.
Insert the dowels
[] into the drill holes and
turn in the screws
[].
Hang the Gateway on the screws.
35GB/IE/NI/MT/CY
Troubleshooting
Problem
Cause Solution
Gateway
cannot be
controlled.
No network connection.
{
Me
}
tab
 
{
Help Center
}
  
{
Network Diagnosis
}
   
{
Start Diagnosis
}
or:
Check network cable
[7].
Mobile device and Gateway
not in same WiFi network.
Move mobile device and Gateway in same WiFi
network.
App functions
not identical
with this
manual.
Older software versions may
have functional limitations.
Newer software versions may
provide improvements.
Visit the App’s Help Centre:
{
Me
}
tab
 
{
Help Center
}
Sub-device
cannot be
installed.
Sub-device is not automatically
detected by the Gateway.
Read the operating instructions of the sub-device.
Press
on the home screen and select the sub-
device from the list (sub-device may have to be
reset to factory settings beforehand).
Software version of the mobile
device lower than described
here.
Install the sub-device using a mobile device with a
newer software version.
Components
of the mobile
device cannot
be controlled.
Access to components not
allowed by the mobile device.
Allow Gateway in the mobile device settings to
access microphone, camera and other services.
Firmware
update fails.
Network overloaded.
Restart firmware update.
Android only: Tap
{
Check for Updates
}
to
keep app and firmware up to date.
If
{
No Updates
}
is shown, then app and
firmware are up to date.
36 GB/IE/NI/MT/CY
Problem
Cause Solution
Sub-device
cannot be
controlled.
Distance between Gateway
and sub-device too large.
Re-position Gateway or sub-device.
Trigger the sub-device.
Walls or obstacles between
Gateway and sub-device.
Battery/Batteries of the sub-
device flat.
Replace battery/batteries.
Sub-device not connected to
the mains
Connect the sub-device to a socket-outlet.
{
Device Offline
}
: Sub-device
switched off.
Switch on sub-device.
37GB/IE/NI/MT/CY
Installing and using the RGB lamps/Remote control
Start-up (remote control)
Before first use, remove the insulating strip
from the battery compartment
[9].
Optional – Wall bracket
mounting (remote control)
There are 2 ways to mount the wall
bracket
[6] of the remote control [].
G
5 6
7 8
With screws
(Fig. G )
m
WARNING! Risk of electric shock!
Do not drill into any pipes or mains cables
beneath the mounting surface. Use a voltage/
metal detector.
1. Use the mounting template
[] for marking
the position of the drill holes.
2. Mark the position of the 2 drill holes on the
wall.
3. Drill the holes:
Ø: approx. 5 mm
Depth: approx. 22 mm
4. Insert the dowels
[7] into the drill holes. If
necessary, use a hammer.
5. Turn the screws
[7] into the dowels [7].
6. Hang the wall bracket
[6] on the screws [7].
With adhesive tapes
(Fig. G )
The mounting surface must be clean, free from
grease and dry. Otherwise the stickiness of
the double-sided adhesive tape
[5] might be
limited.
1. Remove the protective film from the adhesive
tapes
[5].
2. Attach the adhesive tapes
[5] to the back of
the wall bracket
[6].
3. Remove the protective films from the other
side of the adhesive tapes
[5].
4. Attach the wall bracket
[6] at the desired
point.
38 GB/IE/NI/MT/CY
Pairing RGB lamps and mobile
device
Preparation
1. Light switch off.
2. Screw RGB lamps
[1] into lamp sockets.
3. Light switch on.
RGB lamps
[1] flashing slowly.
4. Ready for pairing.
5. Open Lidl Home app.
6.
{
Home
}
tab:
Tap
(add further devices).
7. Select category:
{
Lighting
}
8. Select: RGB Lamp
– iOS:
{
Atmosphere
}
– Android:
{
Atmosphere
}
39GB/IE/NI/MT/CY
9. Select Gateway.
Only necessary, if you have 2 or more
Gateways.
10. Follow the App instructions.
11. Establishing connection.
12. Naming the product: Tap
and enter a
name.
13. Tap one of the rooms to set location of
product (selected room is grayed out).
If more than one product is connected:
You can rename the product and define its
location.
14. Tap
{
Done
}
.
15. Pairing completed.
16. Return to home screen:
Tap
{
<
}
.
Creating a product group
1. Open Lidl Home app.
2.
{
Home
}
tab:
Tap on one of the connected LED bulbs.
3. Tap
(top right).
4. Tap
{
Create Group
}
.
5. Select devices.
6. Tap
{
Save
}
.
7. Enter a group name.
8. Tap
{
Save
}
.
40 GB/IE/NI/MT/CY
Removing a product group
1. Open Lidl Home app.
2.
{
Home
}
tab:
Tap on the group you want to remove.
3. Tap
(top right).
4. Tap
{
Dismiss Group
}
.
5. Tap
{
Confirm
}
.
Pairing remote control and
mobile device
1. Pull protective strip out of battery
compartment
[9].
2. Press and hold
[3] and [2] for about
5 s until LED
[4] flashes.
3. Ready for pairing.
4. Open Lidl Home app.
5.
{
Home
}
tab:
Tap
(add further devices).
6. Select category:
{
Others
}
7. Select: Remote control
– iOS:
{
Remote controller
}
– Android:
{
Remote controller
}
41GB/IE/NI/MT/CY
8. Select Gateway.
Only necessary, if you have 2 or more
Gateways.
9. Follow the App instructions.
10. Establishing connection.
11. Naming the product: Tap and enter a
name.
12. Tap one of the rooms to set location of
product (selected room is grayed out).
13. Tap
{
Done
}
.
14. Pairing completed.
15. Return to home screen:
Tap
{
<
}
.
42 GB/IE/NI/MT/CY
Unpairing RGB lamps/remote
control from mobile device
1. Open Lidl Home app.
2.
{
Home
}
tab:
Select:
–
{
ZigBee Gateway
}
–
{
Atmosphere
}
or
–
{
Remote controller
}
3. Tap .
4. Tap
{
Remove Device
}
.
Select:
–
{
Disconnect
}
or
–
{
Disconnect and wipe data
}
( “Additional functions”).
5. Tap
{
Confirm
}
.
Switching on / off
1. Tap .
Settings
Colour temperature /
brightness (white)
Tab
{
White
}
:
1. Adjust settings using the 2 sliders.
: Colour temperature
(warm white to cool white)
: Brightness
: Current setting
43GB/IE/NI/MT/CY
Colour settings
Tab
{
Colour
}
:
1. Adjust settings using the 3 sliders.
: Colour
: Brightness
: Contrast
: Current setting
44 GB/IE/NI/MT/CY
Scenes
Tab
{
Scene
}
:
1. Select one of the default light scenes:
Name
Setting
Brightness Temp. Colour
{
Night
}
low warm –
{
Read
}
high neutral white –
{
Working
}
high cold –
{
Leisure
}
medium neutral white –
{
Soft
}
high – green
{
Colorful
}
high – changing multi-colour
{
Gorgeous
}
high – changing multi-colour
45GB/IE/NI/MT/CY
Editing scenes
1. Tap on one of the scene logos
(for example:
).
2. Tap
{
Edit
}
.
3. Tap on the default photo to replace it with
another one.
Select:
–
{
Take Photo
}
–
{
Choose From Library
}
or
–
{
Cancel
}
(cancel photo replacement)
Access to the mobile devices’ camera and
photo library is required.
4.
{
Scene Name
}
: Change scene name.
5.
{
Scene Colour
}
tab:
Tap
and adjust settings using the slider.
: Colourful light
: White light
: Brightness
: Colour contrast (colourful light)
6.
{
Colour Flash Mode
}
: Choose fl ash mode.
{
Static
}
=
Static light
{
Flash
}
= *
Flash light
{
Breath
}
= *
Pulsing light
{
Done
}
=
Confi rm setting
*
{
Colour Flash Speed
}
: Adjust fl ash speed
setting using the slider.
46 GB/IE/NI/MT/CY
7. Tap
{
Scene Colour
}
:
Add colours: Tap
.
Delete colours: Tap
.
{
Delete
}
.
8.
{
Reset
}
: Reset of selected scene to default
settings.
9.
{
Confirm
}
: Confirm settings.
Music
Tab
{
Music
}
:
1. Tap
{
Music
}
. Function is activated.
2. The product synchronises to ambient music
(as registered by your mobile phone’s
microphone).
3. Colour and brightness changes following the
audio input.
Access to the mobile devices’ microphone is
required to use this function.
47GB/IE/NI/MT/CY
Time settings
Countdown
Switches the product automatically on/off
after a countdown (this function is available
for a single product only).
1. Tap
{
Left time
}
.
2. Set
{
Hour
}
(00 to 11) and
{
Minute
}
(00 to 59).
3. Tap
{
Confirm
}
.
4. Remaining time is displayed on the bottom
left.
5. Cancelling countdown prematurely:
Tap the remaining time.
Tap
.
Countdown deactivated.
Tap
{
Confirm
}
.
Schedule
Switches the product automatically on/off
following a user-defined time plan.
1. Tap
{
Schedule
}
.
2. Tap
{
Add
}
.
48 GB/IE/NI/MT/CY
3. Set the time.
4. Optional: Tap
{
Repeat
}
.
Select weekday(s).
= selected weekdays
Cancel selection: Tap on weekday again.
Selection completed: Tap
{
<
}
.
5. Tap
{
Note
}
.
Put down your notes for this schedule.
Tap
{
Save
}
.
6.
{
Notification
}
: Tap to turn on function.
7. Tap
{
Switch
}
.
Select:
–
{
On
}
or
–
{
Off
}
Selection completed:
– iOS:
Tap
{
<
}
.
– Android:
Tap
{
Done
}
.
8. Tap
{
Save
}
.
Action is added to the time plan.
49GB/IE/NI/MT/CY
1. Deactivate action: Tap .
2. Delete action:
– iOS: Wipe action to the left.
– Android: Tap and hold.
Tap
{
Delete
}
.
3. Add more actions, if desired.
Additional functions
1. Tap (top right).
Select:
–
{
Atmosphere
}
–
{
Remote controller
}
2. Tap .
Select:
–
{
Icon
}
*
{
Take Photo
}
or
*
{
Select from Album
}
–
{
Name
}
:
Rename product.
–
{
Location
}
:
Assign a room to the product.
*
Access to the mobile devices’
camera and photo library is
required.
Complete description of additional
functions:
Installing and using the Gateway:
Additional functions.
50 GB/IE/NI/MT/CY
Resetting RGB lamps/remote
control manually
RGB lamps
1. Light switch on/off 3 times.
2. Light switch on.
Lamp flashes slowly = Reset successful.
Remote control
1. Press and hold [3] and [2] buttons for
5 s.
2. LED
[4] flashing = Reset successful.
This function only resets the data which is
stored in the local memory of the product. If
you want to reset the cloud memory as well,
perform a reset via the app (see “Additional
functions”,
{
Disconnect and wipe data
}
).
If you have previously paired the product with
the remote control (without Gateway/App):
Unpairing the product = see “Unpairing
remote control from lamps (without Gateway/
App)”
Remote control
Button functions
Button Function
[2]
On
Toggle colour temperature:
– warm white
– medium warm white
– medium cool white
– cool white
[3]
Off
[]
Reduce brightness
[]
Increase brightness
Pairing remote control
and RGB lamps (without
Gateway/App)
NOTES:
If you have previously paired the RGB lamps
with the gateway, reset the RGB lamps (see
“Resetting product manually”).
You can control up to 30 RGB lamps
synchronously with the remote control.
One RGB lamp cannot be paired with
multiple remote controls.
Only a single RGB lamp can be paired per
operation. Repeat the pairing procedure for
all other RGB lamps.
1. Pull protective strip out of battery
compartment
[9].
2. Light switch off.
3. Screw RGB lamp
[1] into lamp socket.
4. Light switch on.
RGB lamp
[1] flashes slowly.
5. Wait 3 minutes until RGB lamp
[1] is lit
continuously.
6. Hold remote control
[] close to
RGB lamp
[1] (max. distance: 1.5 m).
7. Press and hold
[2] button for 3 s.
LED
[4] flashes.
8. LED
[4] lights up for approx. 2 s if pairing is
successful.
RGB lamp
[1] flashes 3 times.
51GB/IE/NI/MT/CY
Pairing remote control and
RGB lamps (via Gateway/
App)
NOTE: Only individual products can be
assigned to the remote control.
1.
{
Home
}
tab:
Tap
{
Remote controller
}
.
2. Tap
.
3. Follow the app instructions. Then, press and
hold
[] and [] buttons. LED [4] starts
flashing. Tap
{
Confirm
}
.
4.
{
Create Group
}
:
Add products to a group in order to
synchronise the use of all grouped devices via
the remote control.
= selected devices.
Tap
{
Confirm
}
.
Name group.
Tap
{
Save
}
.
5. The grouped lamps can now be controlled via
the remote control.
Unpairing remote control
from RGB lamps (without
Gateway/App)
1. Light switch on.
2. Hold remote control
[] close to
RGB lamp
[1] (max. distance: 1.5 m).
3. Press and hold
[3] button for 3 s.
LED
[4] flashes.
4. LED
[4] lights up for approx. 2 s if unpairing
is successful.
RGB lamp
[1] flashes 3 times.
Changing the battery
H
10 912
Remove the battery compartment cover [].
Remove the battery. Insert a new battery into
the battery compartment
[9]. The plus (+)
symbol on the battery must point outwards.
Reattach the battery compartment cover
(fig. H).
52 GB/IE/NI/MT/CY
Editing light scenes (via
remote control)
The button [2] on the remote control can be
programmed to recall scenes when the button is
pressed repeatedly.
1. Open Lidl Home app.
2.
{
Home
}
tab:
Tap
{
Remote controller
}
.
3. Tap the scene to be edited (for 2
nd
to 5
th
hit
only).
4. After you have finished editing the scene:
– Tap
{
Save
}
– Tap
{
<
}
Troubleshooting
Problem Cause Solution
Product*
cannot be
controlled.
Distance between
Gateway and
product too large.
Re-position
Gateway or
product.
Walls or obstacles
between Gateway
and product.
Light switch on. Light switch
off.
* Product = RGB lamp or remote control
53GB/IE/NI/MT/CY
Cleaning, disposal, warranty, conformity
Cleaning and care
Cleaning (General)
m
WARNING! Risk of electric shock!
During cleaning or operation, do not immerse
the electrical parts of the product in water or
other liquids. Never hold the product under
running water.
Clean the product and its accessories with a
slightly moistened cloth.
Do not allow any water or other liquids to
enter the product’s interior.
Do not use abrasives, harsh cleaning solutions
or hard brushes for cleaning.
Let all parts dry afterwards.
Cleaning (Gateway)
m
WARNING! During cleaning or operation,
do not immerse the electrical parts of the
product and the USB power adaptor
[] in
water or other liquids. Never hold the product
and the USB power adaptor under running
water.
Before cleaning, disconnect the USB power
adaptor
[] from the power supply.
Clean the product and its accessories with a
slightly moistened cloth.
Do not allow any water or other liquids to
enter the product’s interior.
Do not use abrasives, harsh cleaning solutions
or hard brushes for cleaning.
Let all parts dry afterwards.
Cleaning (RGB lamps)
m
WARNING! Risk of electric shock!
Before changing luminary, cleaning or
maintenance: Switch off the product. Remove
fuse or switch off the circuit breaker in the fuse
box (position O).
Let product cool for at least 5 minutes.
Cleaning (Remote control)
Before cleaning: Remove the battery from the
battery compartment
[9].
Storage
When not in use, store the product in its
original packaging.
Store the product in a dry, secure location
away from children.
54 GB/IE/NI/MT/CY
Disposal
Before passing on, disposing of or returning
the product to the manufacturer, make sure
that all data has been deleted from the
product and the cloud.
To do this, refer to the chapter:
“Additional functions”, menu point:
{
Disconnect and wipe data
}
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and
fibreboard / 80–98: composite
materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment.
The Triman logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when
it has reached the end of its useful
life and not in the household waste.
Information on collection points and
their opening hours can be obtained
from your local authority.
Faulty or used batteries / rechargeable batteries
must be recycled in accordance with Directive
2006/66/EC and its amendments. Please return
the batteries / rechargeable batteries and / or
the product to the available collection points.
Environmental damage
through incorrect disposal of
the batteries / rechargeable
batteries!
Batteries / rechargeable batteries may not be
disposed of with the usual domestic waste. They
may contain toxic heavy metals and are subject to
hazardous waste treatment rules and regulations.
The chemical symbols for heavy metals are as
follows: Cd = cadmium, Hg = mercury, Pb = lead.
That is why you should dispose of used batteries /
rechargeable batteries at a local collection point.
55GB/IE/NI/MT/CY
Warranty
The product has been manufactured to strict
quality guidelines and meticulously examined
before delivery. In the event of product defects
you have legal rights against the retailer of this
product. Your legal rights are not limited in any
way by our warranty detailed below.
The warranty for this product is 3 years from the
date of purchase. Should this product show any
fault in materials or manufacture within 3 years
from the date of purchase, we will repair or
replace it – at our choice – free of charge to you.
The warranty period begins on the date of
purchase. Please keep the original sales receipt
in a safe location. This document is required as
your proof of purchase. This warranty becomes
void if the product has been damaged, or used or
maintained improperly.
The warranty applies to defects in material
or manufacture. This warranty does not cover
product parts subject to normal wear, thus
possibly considered consumables (e.g. batteries)
or for damage to fragile parts, e.g. switches,
rechargeable batteries or glass parts.
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
Please have the till receipt and the item number
(e.g. IAN 123456_7890) available as proof of
purchase.
You will find the item number on the rating plate,
an engraving, on the front page of the instructions
for use (bottom left), or as a sticker on the rear or
bottom of the product.
If functional or other defects occur, please contact
the service department listed either by telephone
or by e-mail.
You can return a defective product to us free
of charge to the service address that will be
provided to you. Ensure that you enclose the proof
of purchase (till receipt) and information about
what the defect is and when it occurred.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
Service Northern Ireland
Tel.: 0800927852
E-Mail: owim@lidl.ie
Service Malta
Tel.: 80062960
E-Mail: owim@lidl.com.mt
Service Cyprus
Tel.: 8009 4211
E-Mail: owim@lidl.com.cy
56 GB/IE/NI/MT/CY
Simplified EU declaration
of conformity
Hereby, OWIM GmbH & Co. KG,
Stiftsbergstraße 1, 74167 Neckarsulm,
GERMANY declares that the product SMART
LIGHTING STARTER KIT WITH COLOUR
BULBS E27 HG06106C / HG06322 /
HG06323 is in compliance with Directive
2014/53/EU, 2011/65/EU and
2009/125/EC.
The full text of the EU declaration of conformity
is available at the following internet address:
www.owim.com
IAN 343820_2004
OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model No.: HG06106C / HG06322 / HG06323
Version: 09/2020
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LivarnoLux HG06106C - IAN 343820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LivarnoLux HG06106C - IAN 343820 in the language / languages: English as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LivarnoLux HG06106C - IAN 343820

LivarnoLux HG06106C - IAN 343820 User Manual - German - 57 pages

LivarnoLux HG06106C - IAN 343820 User Manual - Dutch - 58 pages

LivarnoLux HG06106C - IAN 343820 User Manual - French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info