662527

LivarnoLux 14121209L - IAN 283331 Manual

8
Zoom out
Zoom in
Previous page
1/25
Next page
8 GB/IE/NI
Care and cleaning / Disposal / Warranty and ServiceSafety / Initial use
Remain alert at all times and always watch what
you are doing. Always proceed with caution
and do not assemble the lamp if you cannot
concentrate or feel unwell.
In order to disconnect the lamp completely from
the power supply, the mains plug
5
must be
removed from the socket.
Initial use
Assembling the light
Model no.: 14121106L / 14121209L
Connect the sections of the tube
3
and screw
in place.
Note: Be sure to screw in the tubes
3
as far
as possible so that the light is stable.
Repeat this process with all sections of the
tube
3
.
Assemble the lamp head by screwing the tubes
3
one after the other onto the screw thread
2
.
Note: Be sure to screw in the tubes
3
as far
as possible so that the light is stable.
Use a clean, lint-free cloth to insert the bulb
1
.
S
crew the bulb
1
clockwise into the lamp socket.
Plug the mains plug
5
into a properly in-
stalled socket.
Verify it is seated correctly.
Model no.: 14121305L
Note: Remove the transport locks from the tubes
3
.
Please ensure that you pull the cable during assembly
slowly through the tube
3
.
Connect the individual sections of tube
3
to
one another and screw into place in an anti-
clockwise direction. Be careful not to damage
the cable in the inside of the lamp.
Screw the tube
3
clockwise onto the base
6
.
Remove the lamp ring
9
from the lamp
socket
11
.
Place the lamp shade
10
onto the lamp socket
11
and screw it tightly using the lamp ring
9
.
Use a clean, lint-free cloth to insert the bulb
1
.
Screw the bulb
1
clockwise into the lamp
socket
11
.
Plug the mains plug
5
into a properly installed
socket.
Verify it is seated correctly.
Your light is now ready to use.
Switching the light on / off
Use the foot switch
4
to turn the LED light on
and off.
Adjusting the lamp
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES! Allow the lamp to cool
down completely.
Model 14121305L: Bring the lamp arm into
the desired position
8
. If the lamp arm
8
changes position, retighten the locating screw
7
.
All models: The lamp head for all models can
be moved up or down.
Changing the bulb
DANGER OF ELECTRIC
SHOCK! First unplug the mains plug
5
from the
socket.
CAUTION! RISK OF BURNS DUE TO HOT
S
URFACES! Allow the light to cool down comple
tely.
Only replace the lamp after it has completely
cooled off.
Use a clean, lint-free cloth when replacing the
bulb
1
.
Twist the defective bulb
1
anti-clockwise out
of the bulb socket.
Only use LED bulbs with a maximum output of
7 W and E27 base.
Insert the new bulb
1
into the bulb socket and
turn it clockwise to tighten it. Ensure that it is
positioned correctly.
Plug the mains plug
5
into the socket again.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LivarnoLux 14121209L - IAN 283331 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LivarnoLux 14121209L - IAN 283331 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info