Manual Livarno LTLS10A1 - IAN 280564 (page 10 of 52) (English, German, Dutch, Danish, Polish)

793230

Zoom out

Zoom in

1/52

LivarnoLux LTLS 10 A1

8 - English

 If you want to place the sun lamp on a flat surface, unfold the base of the lamp (5) on the back side.

The base of the lamp (5) can be unfolded in a continuous manner, allowing you to adjust the tilt of the

sun lamp exactly as you wish. Please note that the tilt angle may not exceed 30 degrees. This is to

ensure that the sun lamp is positioned securely.

 You can use the assembly materials provided to mount the lamp on a wall. Please find out in advance

which assembly materials are suitable for the location you have chosen to mount the lamp. Assembly

materials suitable for wall mounting on concrete are provided with the sun lamp.

 Measure the distance between the two required drill holes between the two fixing lugs (6), as

shown in the following diagram.

 Mark the positions of the drill holes on the wall. The holes must be placed on a horizontal line.

 Use the suitable tool to drill holes that suit the assembly materials used.

 Insert the raw plugs if this is required for the assembly materials you are using. Screw in the

screws until approximately 5 mm of the screw heads are protruding.

 Insert the small plug of the mains adapter into the mains adapter port (7) before you continue.

This step will not be possible later.

 Fold the base of the lamp (5) upwards and press firmly near the hinge a second time in order

to fit the base of the lamp (5) flatly against the back wall.

 Mount the sun lamp on the screws so that the screw heads poke through the round openings on

the lower side of the fixing lugs (6).

 Finally, slide the sun lamp evenly downwards by approx. 10----12 mm. The screw heads should

now be positioned behind the narrow ends of the fixing lugs (6), keeping the sun lamp securely

in place. Check whether the sun lamp is fixed securely by gently pulling it towards you. If the

sun lamp is not properly fixed, repeat the steps above. You may have screwed the screws too

far into the wall. If this is the case, unscrew them slightly and try again.

 Insert the mains adapter into an easily accessible, live power socket.

Raw plugs may not be necessary for some walls, such as walls made of wood. If this is the case, you can

screw the screws directly into the wall. If you don’t have any experience working with tools or feel unsure

which assembly materials are suitable for your wall, find someone who has the right skills to help you.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Livarno LTLS10A1 - IAN 280564 in the language / languages: English, German, Dutch, Danish, Polish as an attachment in your email.

The manual is 3.92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Livarno LTLS10A1 - IAN 280564 Manual

Product: