815059
6
Zoom out
Zoom in
Previous page
1/6
Next page
Set-up
5
5
10
Inflation & Staking
6
8
T E S T
R E SET
9
Test the blower AC Adapter:
1. Plug GFCI into receptacle.
2. Press reset button.
3. Press test button.
4. Press reset button to use product. Do not
use if the button fails to disable fan.
WARNING:
If the blower remains ON when the “test”
button is pushed, the unit is NOT working
properly. DO NOT USE THE UNIT. Take the unit
to a certified electrician immediately.
GFCI
only
7Wrap drawstring around the tube and end of blower
once, and tie tightly in place.
6
Attach longer fabric tube to blower
unit making sure the tube is not
twisted.
CAUTION CAUTION
electrical hazard Do not touch
Switch power on
2
1
3 4
Switch power on. If blower does
not operate when switched on,
press reset button on GFCI adaptor.
Secure the blower to
the ground with the
provided stakes.
Secure the Jump ‘n Double Slide™ Bouncer
to the ground with the provided stakes.
To prevent tripping, pull the stake loops all
the way out, then drive stakes completely
into the ground.
on
off
6.6 ft
(2 m)
6.6 ft
(2 m)
6.6 ft (2 m)
6.6 ft (2 m)
6.6 ft (2 m)
6.6 ft (2 m)
WARNING: THIS IS NOT
AN EXIT AND IT IS ONLY
FOR ENTRANCE.
Blower should remain on and continuously inflate
bouncer during use. Airflow through seams is
normal. Do not try to seal or repair seams.
NOTE: Dispose of tissue paper packed inside
bouncer after inflation.
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
• Do not open or try to service the blower. If blower needs servicing, take it to a
reputable dealer.
• Clearly mark the path of the power cord to avoid tripping and/or damage by yard
equipment such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used and do not insert
small objects into any part of the blower.
WARNING - Electrical Hazard - DO NOT USE EXTENSION CORDS WITH THIS
PRODUCT.
• Disconnect the blower from the power source when moving the slide.
WARNING - To reduce the risk of fire or electric shock, do not use this blower
with any solid - state speed control device.
• The blower should be securely staked to the ground before use.
6.6 ft
(2 m)
6.6 ft
(2 m)
6.6 ft (2 m)
6.6 ft (2 m)
6.6 ft (2 m)
6.6 ft (2 m)
Tie off the short
tube as shown.
Re-measure clearance zone prior to inflation.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Little tikes 620133 Jump n Double Slide Bouncer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Little tikes 620133 Jump n Double Slide Bouncer in the language / languages: English as an attachment in your email.

The manual is 0.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info