495205

Lite-On HD-A970 Series Manual

77
Zoom out
Zoom in
Previous page
1/84
Next page
77
Troubleshooting
Troubleshooting
If you experience any problem while using the DVD recorder, please consult the following troubleshooting guide
first, as it may offer immediate solution to the condition occurred. Should the problem remain, contact a Lite-On IT’s
service point near you. For more information, please visit www.liteonit.com
Picture
Problem Possible Solutions
No image shown on the TV
screen
► Make sure the video cable (composite, component, SCART, S-Video, HDMI,
etc.) between TV and DVD recorder is correctly and securely connected.
► Check whether you have switched your TV’s input source to corresponding
option (e.g. VIDEO 1, LINE 2, etc.), so that signal from the DVD recorder can
appear on screen. For further information, please check the instruction manual
offered by your TV manufacturer.
► Make sure a disc is properly placed on the disc tray, and it is recorded in a
format compatible with your local TV system (NTSC or PAL).
► Check your setting on component video output mode (Progressive or Interlaced).
Please select the output mode supported by your TV. To reset the recorder,
press(direction button), ‘5’, ‘0’, ‘2’, ‘0’, ENTER on the remote control.
Image shown with noises
► Check if the disc is distorted or scratched.
► If the video output signal from the recorder goes via VCR to your TV set, or if
you connect the recorder to a TV/VCR set, the copyright protection code applied
to some DVD programs could affect picture quality. If you still experience
this problem even when you connect the recorder to TV, try connecting your
recorder to the TV’s S-VIDEO input.
Image imported from an external
device is distorted
► If the video signal from the external device is copy-protected, you need to
connect the device directly to your TV.
Recording
Problem Possible Solutions
Cannot record
► Check whether you have inserted a recordable disc.
► Check whether the disc you insert has been formatted or prepared for recording.
► Press DISPLAY to check whether there is enough space on the disc.
► Check whether the disc has been finalized. You CANNOT record on a finalized
disc.
► Check whether the disc you insert has already been used for recording on other
DVD recorders.
► Check whether the disc you insert has already been used for recording pro-
grams of a different type of TV signal. A disc containing NTSC-based contents
CANNOT be used to record PAL-based programs and vice versa.
Recording does not start
immediately after pressing ●
RECORD button
► This occurs as disc preparation process is taking place, which will last for a few
seconds. (Applicable to DVD-R/DVD+R/DVD+RW/DVD+R DL discs)
… 77 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lite-On HD-A970 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lite-On HD-A970 Series in the language / languages: English as an attachment in your email.

The manual is 9,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info