602392
11
Zoom out
Zoom in
Previous page
1/66
Next page
Chapter 2
Installing and Using the Camera Utility
10
Wireless-N Internet Home Monitoring Camera
My Camera List
The My camera list section of the Setup > Cameras screen
contains a list of all Cameras that have been added (up to
9).
Camera Name Displays the name of the Camera.
Selecting a Camera on this list will display its details in the
Camera Details section of the screen.
Add Camera to my list
Automatically add cameras Displays a list of currently
detected Cameras on your LAN. To add a camera to My
camera list, select the Camera from the Automatically add
cameras list and click Add to my list. If your Camera is not
listed, click Refresh to update the list, or add the Camera
manually.
Manually add cameras To manually add a Camera to
My camera list, go to the Address field and enter either its
web address or its IP address with port number. Then click
Add to my list. To erase your entry, click Clear.
Camera Details
The Camera Details section allows you to enter camera
information and then displays video and information from
the currently selected Camera.
Camera Status Displays the status of the selected
Camera.
Camera Name Displays the name of the selected Camera.
IP Address Displays the IP address of the selected
Camera.
User Name Displays the selected Cameras user name.
Password Displays the selected Cameras password. For
security reasons, the password is displayed as •••••.
Port Number Displays the selected Cameras port
number.
Stream Type Displays the selected Camera’s stream type.
To change the stream type, select either MJPEG or MPEG4
from the drop down list and click Save.
Two buttons are located under the video display. These
buttons act upon the selected Cameras video as explained
below.
Button Function
Flip Click this button to flip the current
video display top-to-bottom.
Mirror Click this button to reverse the
current video display left-to-right.
Click
Advanced Camera Settings
to open the Web-based
Utility.
Setup > Recording Options
Click on the Recording Options tab to set the recording
schedule for a network Camera.
Setup > Recording Options
Video Recording Options
To set the selected Camera to continuously record, select
Always Record.
To set up a recording schedule for the selected Camera:
1. Select Record on a Scheduled Time Range if you
want the Camera to record during the specified dates
and times, or select Record on Motion Event in
Scheduled Time Range Only if you want the Camera
to record only at those (specified) dates and times
when movement is detected.
2. Fill in the following fields:
Select Days From the drop down menu, select the
days on which you want the Camera to record. The
choices are One Time, Every Day, Mon-Fri, Sat-
Sun, Sun, Mon, Tue, Wed, Thu, Fri, and Sat. (All
settings except One Time cause recording to occur
on a recurring basis.)
Start Date (mm/dd/yyyy) Enter the date to start
the recording, in mm/dd/yyyy format, or select the
start date using the drop down calendar.
Start Time (hh:mm) Select the time to start the
recording using the drop down menus.
End Time (hh:mm) Select the time to end the
recording using the drop down menus.
3. Click Add to list to save the new recording schedule.
4. The scheduled recording appears in the table of
scheduled recordings at the bottom of the screen.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WVC80N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WVC80N in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info