612983
97
Zoom out
Zoom in
Previous page
1/289
Next page
11
Configuración avanzada
Linksys WUMC710
WEP
Network Name (SSID) (Nombre de la red, SSID) Muestra automáticamente el
nombre de la red que ha seleccionado.
Security Mode (Modo de seguridad) Aparece automáticamente el modo WEP.
Encryption (Encriptación) Seleccione un nivel de encriptación WEP, 40/64 bits
(10 hex digits) (40/64 bits, 10 dígitos hexadecimales) o 104/128 bits (26 hex
digits) (104/128 bits, 26 dígitos hexadecimales).
Key 1 (Clave 1) Introduzca la clave WEP de la red.
Tx Key (Clave de transmisión) Key 1 (Clave 1) es la clave de transmisión
utilizada por el conector de medios.
Authentication (Autenticacn) El valor predeterminado es Auto (Automático),
que permite utilizar la autenticación Open System (Sistema abierto) o Shared
key (Clave compartida). Seleccione Open (Abierto) para utilizar la autenticación
de sistema abierto, en la que el emisor y el receptor no utilizan una clave
WEP para la autenticación. Seleccione Shared (Compartida) para utilizar la
autenticación de clave compartida, en la que el emisor y el receptor utilizan
una clave WEP para la autenticación.
Haga clic en Refresh (Actualizar) para actualizar la información de la pantalla.
Cuando haya introducido los parámetros de seguridad, haga clic en Connect
(Conectar).
Wireless > QoS (Inalámbrico > QoS)
Wireless (Inalámbrico)
WMM Support (Compatibilidad con WMM) Wi-Fi Multimedia (WMM) es una
característica de calidad de servicio inalámbrica que mejora la calidad de las
aplicaciones de audio, vídeo y voz, dando prioridad al tráfico inalámbrico.
Para utilizar esta característica, el router inalámbrico o punto de acceso debe
admitir WMM. Para desactivar esta opción, seleccione Disabled (Desactivada).
De lo contrario, mantenga el parámetro predeterminado, Enabled (Activada).
No Acknowledgement (Sin confirmación) Si desea desactivar la función de
confirmación del conector de medios para que no envíe los datos de nuevo si
se produce un error, seleccione Enabled (Activado). De lo contrario, mantenga
el parámetro predeterminado, Disabled (Desactivado).
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WUMC710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WUMC710 in the language / languages: All languages as an attachment in your email.

The manual is 7,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info