430422
41
Zoom out
Zoom in
Previous page
1/145
Next page
31
Chapter 6: Configuring the Wireless-G VPN Broadband Router
The Security Tab - VPN
Wireless-G VPN Broadband Router
The Security Tab - VPN
Virtual Private Networking (VPN) is a security measure that basically creates a secure connection between two
remote locations. This connection is very specific as far as its settings are concerned; this is what creates the
security. The VPN screen allows you to configure your VPN settings to make your network more secure.
VPN PassThrough
IPSec Passthrough. IPSec (Internet Protocol Security) is a suite of protocols used to implement secure exchange
of packets at the IP layer. To allow IPSec Passthrough, click the Enabled button. To disable IPSec Passthrough,
click the Disabled button.
PPTP Pass Through. PPTP (Point-to-Point Tunneling Protocol) Passthrough allows the Point-to-Point (PPP) to be
tunneled through an IP network. To allow PPTP Passthrough, click the Enabled button. To disable PPTP
Passthrough, click the Disabled button.
L2TP Passthrough. Layer 2 Tunneling Protocol Passthrough is the method used to enable Point-to-Point
sessions via the Internet on the Layer 2 level. To allow L2TP Passthrough, click the Enabled button. To disable
L2TP Passthrough, click the Disabled button.
VPN Tunnel
The VPN Broadband Router creates a tunnel or channel between two endpoints, so that the data or information
between these endpoints is secure.
Select Tunnel Entry. To establish this tunnel, select the tunnel you wish to create from the drop-down box. It is
possible to create up to 100 simultaneous tunnels.
VPN Tunnel. Click Enabled to enable the selected VPN Tunnel.
VPN Gateway. If you want to route all the traffic through the tunnel, and not just the ones destined for the remote
secure group, click Enabled.
Tunnel Name. Once the tunnel is enabled, enter the name of the tunnel. This allows you to identify multiple
tunnels and does not have to match the name used at the other end of the tunnel.
Local Secure Group
The Local Secure Group is the computer(s) on your LAN that can access the tunnel. From the drop-down menu,
select Subnet, to include the entire network for the tunnel; select IP Address if you want a specific computer; IP
Range, if you want to include a range of IP addresses; or select Host, which is used with Port Forwarding to
Figure 6-21: Security Tab - VPN
Figure 6-22: Local Secure Group - Subnet
and Remote Secure Group - Subnet
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys wrv54g router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys wrv54g router in the language / languages: English as an attachment in your email.

The manual is 8,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info