430422
22
Zoom out
Zoom in
Previous page
1/145
Next page
12
Chapter 5: Connecting the Wireless-G VPN Broadband Router
Wireless Connection to a PC
Wireless-G VPN Broadband Router
Wireless Connection to a PC
If you want to use a wireless connection to access the Router, follow these instructions:
1. Make sure that all of your network’s hardware is powered off, including the Router, PCs, and cable or DSL
modem.
2. Connect an Ethernet network cable from your cable or DSL modem to the Internet port on the Router’s rear
panel.
3. Power on the cable or DSL modem.
4. Connect the power adapter to the Router’s Power port, and then plug the power adapter into a power outlet.
The Power LED on the front panel will light up green as soon as the power adapter is connected properly. The
Power LED will flash for a few seconds, and then it will be solidly lit when the self-test is complete. If the LED
flashes for one minute or longer, seeAppendix A: Troubleshooting.
5. Power on one of the PCs on your wireless network(s).
6. For initial access to the Router through a wireless connection, make sure the PC’s wireless adapter has its
SSID set to linksys-g (the Router’s default setting) and its WEP encryption disabled. After you have accessed
the Router, you can change the Router and this PC’s adapter settings to match your usual network settings.
The Router’s hardware installation is now complete.
Go to “Chapter 6: Configuring the Wireless-G VPN Broadband Router.
NOTE: You should change the SSID from its
default, linksys, and enable WEP encryption
after you have accessed the Router.
Figure 5-4: Connect to Internet Port
Figure 5-5: Connect to Power Port
NOTE: You should always plug the Router’s power adapter into a power strip with surge protection.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys wrv54g router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys wrv54g router in the language / languages: English as an attachment in your email.

The manual is 8,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info