431160
22
Zoom out
Zoom in
Previous page
1/32
Next page
Chapter 3
Advanced Configuration
18
Wireless-G Broadband Router with SpeedBooster
Log
Log To disable the Log function, keep the default setting,
Disable. To monitor traffic between the network and the
Internet, select Enable.
When you wish to view the logs, click the Incoming Log
or Outgoing Log button, depending on which you wish
to view.
Click the Save Settings button to apply your changes, or
click Cancel Changes to cancel your changes.
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network components.
Administration > Diagnostics
Ping Test
Ping The Ping test will check the status of a connection.
Click the Ping button to open the Ping Test screen. Enter
the address of the PC whose connection you wish to test
and how many times you wish to test it. Then, click the
Ping button. The Ping Test screen will show if the test was
successful. To stop the test, click the Stop button. Click
the Clear Log button to clear the screen. Click the Close
button to return to the Diagnostics screen.
The Ping Test
Traceroute Test
Traceroute To test the performance of a connection, click
the Traceroute button. Enter the address of the PC whose
connection you wish to test and click the Traceroute
button. The Traceroute Test screen will show if the test was
successful. To stop the test, click the Stop button. Click
the Clear Log button to clear the screen. Click the Close
button to return to the Diagnostics screen.
The Traceroute Test
Administration > Factory Defaults
The Administration > Factory Defaults screen allows you
to restore the Routers configuration to its factory default
settings.
Factory Defaults
Restore Factory Defaults To reset the Routers settings
to the default values, select Yes, and then click the Save
Settings button. Any settings you have saved will be lost
when the default settings are restored.
Administration > Factory Defaults
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys wrt54gs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys wrt54gs in the language / languages: English as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info