602279
43
Zoom out
Zoom in
Previous page
1/106
Next page
36
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Storage Tab - FTP Server
Wireless-N Gigabit Router with Storage Link
The Storage Tab - FTP Server
Use the FTP Server screen to configure the Router as an FTP server for your local network.
FTP Server
Setup
Server Name. The name of the Router is displayed here.
FTP Server. Select Enable to use the Router as an FTP server. Otherwise, select Disable. (A USB flash drive or
USB hard disk must be connected to the USB port to use this feature.)
Internet Access. Select Enable to allow access to the FTP server from the Internet. Select Disable, to restrict
access to the FTP server to local users only (from your local networked computers only).
Port. Select the port number to use. The default port is 21.
Share
Select the partition(s) or folder(s) to share through the FTP server.
All Partitions. Selects all partitions on the USB disk.
Specify Folder. If you want to share a specific folder, click Select Partition and locate the folder.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. Help information is available on the right side of the
screen.
Access
Click the FTP Share Access button to grant specific rights to groups. You can grant Read Only or Read/Write
permission.
On the FTP Access screen, select the appropriate group from the Other Group column and click either the Read
Only or Read/Write button to move the group to the Group With Access column.
After you have made your changes, click the Save Settings button to apply your changes, or click the Cancel
Changes button to undo your changes. Click the Close button to exit the FTP Access screen.
Figure 5-38: Storage Tab - FTP Server
Figure 5-39: FTP Access
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WRT350N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WRT350N in the language / languages: English as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info