430435
37
Zoom out
Zoom in
Previous page
1/99
Next page
30
Chapter 5: Configuring the Gateway
The Security Tab
Wireless-G ADSL Gateway
correctly, or the connection cannot be made. Remember, this is NOT the IP Address of the local VPN Gateway,
but the IP Address of the remote VPN Gateway or device with which you wish to communicate. If you enter an
IP address, only the specific IP Address will be able to acess the tunnel. If you select Any, any IP Address can
access the tunnel.
Encryption. Using Encryption also helps make your connection more secure. There are two different types of
encryption: DES or 3DES (3DES is recommended because it is more secure). You may choose either of these,
but it must be the same type of encryption that is being used by the VPN device at the other end of the tunnel.
Or, you may choose not to encrypt by selecting Disable. In Figure 5-19, DES (which is the default) has been
selected.
Authentication. Authentication acts as another level of security. There are two types of authentication: MD5
and SHA (SHA is recommended because it is more secure). As with encryption, either of these may be
selected, if the VPN device at the other end of the tunnel is using the same type of authentication. Or, both
ends of the tunnel may choose to Disable authentication. In the Manual Key Management screen, MD5 (the
default) has been selected.
Key Management. Select Auto (IKE) or Manual from the drop-down menu. The two methods are described
below.
Auto (IKE)
Select Auto (IKE) and enter a series of numbers or letters in the Pre-shared Key field. Based on this word,
which MUST be entered at both ends of the tunnel if this method is used, a key is generated to scramble
(encrypt) the data being transmitted over the tunnel, where it is unscrambled (decrypted). You may use any
combination of up to 24 numbers or letters in this field. No special characters or spaces are allowed. In the
Key Lifetime field, you may select to have the key expire at the end of a time period. Enter the number of
seconds you’d like the key to be useful, or leave it blank for the key to last indefinitely. Check the box next to
PFS (Perfect Forward Secrecy) to ensure that the initial key exchange and IKE proposals are secure.
Manual
Select Manual, then select the Encryption Algorithm from the drop-down menu. Enter the Encryption Key in
the field (if you chose DES for your Encryption Algorithm, enter 16 hexadecimal characters, if you chose 3DES,
enter 48 hexadecimal characters). Select the Authentication Algorithm from the drop-down menu. Enter the
Authentication Key in the field (if you chose MD5 for your Authentication Algorithm, enter 32 hexadecimal
characters, if you chose SHA1, enter 40 hexadecimal characters). Enter the Inbound and Outbound SPIs in the
respective fields.
Status. The status of the connection is shown.
Click the Connect button to connect your VPN tunnel. Click View Logs to view system, UPnP, VPN, firewall,
access, or all logs.Click the Advanced Settings button and the Advanced IPSec VPN Tunnel Setup screen will
appear.
Figure 5-24: Manual Key Management
Figure 5-25: System Log
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys wireless g adsl gateway wag54g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys wireless g adsl gateway wag54g in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info