300403

Linksys wip330 tel wifi voip Manual

44
Zoom out
Zoom in
Previous page
1/99
Next page
Wireless-G IP Phone
36
Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
Wireless
You have three choices, Set Wi-Fi, Profiles, and Hotspot. If you want to scan for wireless networks in
your local area, select Set Wi-Fi. If you want to set configuration profiles for different network
setups, select Profiles. The Hotspot screen lists the IP Phone’s default hotspots. If you want to save
your user name and password for these default hotspots, select Hotspot. Press the left soft key to
make a selection. Select Return to return to the previous menu.
Set Wi-Fi
After you have selected Set Wi-Fi, the IP Phone will scan the local area for wireless access points or
routers. A list of wireless networks, including hotspots, will be displayed and show their wireless
network names, security status (a lock indicates wireless security), and signal strength, which is
indicated by a bar graph.
There are three sets of instructions. If you will connect to a wireless network, proceed to this section,
“Connection to a Wireless Network.”
The IP Phone has a list of default hotspots, which are shown on the Hotspot screen. If you will connect to a
default hotspot, proceed to this section, “Connection to a Default Hotspot.”
If you will connect to a new hotspot, proceed to this section, “Connection to a New Hotspot.”
Connection to a Wireless Network
1. Scroll through the choices, and press the center selection key (in the middle of the navigation pad) to select
the wireless network you want to use.
If the network you want is not shown, select Rescan for a new scan.
Figure 4-20: Wireless
Figure 4-21: Scanning
for Wireless Networks
Figure 4-22: List of
Wireless Networks
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys wip330 tel wifi voip at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys wip330 tel wifi voip in the language / languages: English as an attachment in your email.

The manual is 11,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info