55513
16
Zoom out
Zoom in
Previous page
1/45
Next page
Chapter 3
Configuration
15
Wireless-G Access Point
Channel Select the appropriate channel from the list
provided; this will be the channel that all of your wireless
devices will use.
SSID Broadcast This feature allows the SSID to be
broadcast by the Access Point. You may want to enable
this function while configuring your network, but make
sure that you disable it when you are finished. With this
enabled, someone could easily obtain the SSID information
with site survey software and gain unauthorized access to
your main network. Click Enabled to broadcast the SSID
to all wireless devices in range. Click Disabled to increase
network security and block the SSID from being seen on
networked PCs.
Current Encryption This shows the encryption method
currently used by the Access Point.
SecureEasySetup Button The status of the Access Point’s
SecureEasySetup feature is displayed here. If you want to
use the Access Point’s SecureEasySetup feature, click the
SecureEasySetup button.
NOTE: If you have already set up your network
using your router’s SecureEasySetup feature,
then you cannot use the Access Point’s
SecureEasySetup feature. You must manually
configure the Access Point’s wireless settings to
match your existing network’s settings.
NOTE: SecureEasySetup uses WPA Personal
encryption. If your current wireless devices
do not support WPA Personal security, then
you cannot use SecureEasySetup on your
network. You will need to manually configure
your network security using the encryption
supported by your existing devices.
You will be asked to press the SecureEasySetup button
(hardware or software) on your wireless client (computer
or other network device) within two minutes to complete
the SecureEasySetup process. Click OK to continue.
Press the SecureEasySetup Button for Your Wireless Client
A new screen will be displayed while the Access Point is
waiting for you to push the SecureEasySetup button on
your wireless client.
Waiting for Completion of SecureEasySetup
When the SecureEasySetup process is complete, the Basic
Wireless Settings screen will appear, and the Current
Encryption and Status information will be updated.
SecureEasySetup Completed Screen
NOTE: You can only add one SecureEasySetup
device at a time. For additional devices, click
SecureEasySetup on the Wireless > Basic
Wireless Settings screen and repeat the process.
Reset Security If you already set up the network using
the Access Point’s SecureEasySetup feature and you want
to replace your current settings with new SecureEasySetup
settings, click Reset Security. A new screen will appear.
You will be asked to confirm that you want to reset your
wireless security settings. Click OK to continue.
Confirm Reset
The Access Point will generate a new network name (SSID)
and set of keys. To configure your wireless network using
SecureEasySetup, return to the previous page of this User
Guide and follow the instructions for the SecureEasySetup
button.
Change these settings as described here and click Save
Settings to apply your changes, or click Cancel Changes
to cancel your changes. Click Help for more information.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WAP54Gv3-EU_qi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WAP54Gv3-EU_qi in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Linksys WAP54Gv3-EU_qi

Linksys WAP54Gv3-EU_qi User Manual - English - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info