55513
5
Zoom out
Zoom in
Previous page
1/45
Next page
Chapter 1
Product Overview
4
Wireless-G Access Point
Chapter 1:
Product Overview
Thank you for choosing the Wireless-G Access Point. Use
the instructions in this User Guide to help you connect
the Access Point, set it up, and configure it to bridge your
different networks. These instructions should be all you
need to get the most out of the Access Point.
Front Panel
Cisco logo (Orange/White) The Cisco logo
is the Access Point’s SecureEasySetup button.
It lights up when the Access Point is powered
on. The Cisco logo is orange when the
SecureEasySetup feature is not used, while the
color white indicates that the SecureEasySetup
feature is being used. When the Access Point
enters SecureEasySetup mode, the Cisco logo
will turn white and start flashing. Then the
Access Point will generate its SSID (network
name) and WPA-Personal (also called WPA-PSK)
key. If the Access Point successfully associates
with a client using SecureEasySetup, the
Cisco logo will stop flashing and stay white.
If the association is unsuccessful, then the
Cisco logo will stop flashing and stay orange.
To clear the SSID and WPA-Personal key, press
and hold down the Cisco logo for ten seconds.
The Cisco logo will turn orange to indicate a
successful reset.
NOTE: SecureEasySetup is a feature
that makes it easy to set up your
wireless network. If you have
SecureEasySetup devices, run the
Setup Wizard on the Access Point’s
Setup Wizard CD-ROM. Then follow
the on-screen instructions.
Power
Power (Red) The Power LED lights up when the
Access Point is powered on.
Act
Act (Green) The Activity LED lights up when
the Access Point is ready for wireless use. It
flashes when the Access Point is transmitting or
receiving data wirelessly.
Link
Link (Orange) The Link LED lights up when
the Access Point is successfully connected
to a device through the Ethernet network
port. The LED flashes when the Access Point
is transmitting or receiving data through the
Ethernet network port.
Back Panel
LAN The Ethernet network port connects to
an Ethernet network device, such as a switch or
router.
RESET There are two ways to reset the Access
Points factory defaults. Either press the Reset
button for approximately ten seconds, or use
the Administration > Factory Defaults screen of
the Access Point’s Web-based Utility.
NOTE: Resetting the Access Point will
erase all of your settings (including
wireless security, IP address, and
power output) and replace them with
the factory defaults. Do not reset the
Access Point if you want to retain
these settings.
POWER The Power port connects to the Access
Points power adapter.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WAP54Gv3-EU_qi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WAP54Gv3-EU_qi in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Linksys WAP54Gv3-EU_qi

Linksys WAP54Gv3-EU_qi User Manual - English - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info