495209

Linksys WAG200G - Wireless-G ADSL Home Gateway Manual

14
Zoom out
Zoom in
Previous page
1/39
Next page
Chapter 4
Advanced Configuration
13
Wireless-G ADSL Home Gateway
Advanced Routing > Routing Table
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Basic Wireless Settings
The basic settings for wireless networking are set on this
screen. This screen allows you to choose your wireless
network mode and wireless security.
Wireless > Basic Wireless Settings
Wireless Network
Wireless Network Mode Select the wireless standards
running on your network. If you have Wireless-G and
Wireless-B devices in your network, keep the default,
Mixed. If you have only Wireless-G devices, select G-Only.
If you have only Wireless-B devices, select B-Only. If you
do not have any wireless devices, select Disabled.
Wireless
Network Name (SSID) The network name is case-
sensitive and must not exceed 32 characters (use any of the
characters on the keyboard). Linksys recommends that you
change the default, to a unique name of your choice.
Wireless Channel Select the channel you want to use.
All devices in your wireless network must use the same
channel in order to communicate.
Wireless SSID Broadcast When wireless devices survey
the local area for wireless networks to associate with, they
will detect the wireless network name or SSID broadcast
by the Gateway. If you want to broadcast the Gateway’s
SSID, keep the default, Enable. Otherwise, select Disable.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Wireless Security
The Wireless Security screen configures the security of your
wireless network(s). The supported wireless security modes
are WPA2-Personal, WPA-Personal, WPA2-Mixed, and
WEP. WPA (Wi-Fi Protected Access), is a security standard
stronger than WEP (Wired Equivalent Privacy) encryption.
WPA2 is a more advanced, more secure version of WPA.
For detailed instructions on configuring wireless security
on the Gateway, refer to “Chapter 2: Wireless Security”.
Wireless Security
Security Mode Select the security method for your
wireless network. Proceed to the appropriate instructions.
If you do not want to use wireless security, keep the
default, Disabled.
NOTE: If you use wireless security, remember
that each device in your wireless network MUST
use the same security method and settings, or
else the wireless devices cannot communicate.
WPA2-Personal (Recommended)
Security Mode > WPA2-Personal
Encryption The method is AES.
Passphrase Enter a key of 8 to 63 characters.
Group Key Renewal Enter how often the Gateway should
change encryption keys. The default is 3600 seconds.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WAG200G - Wireless-G ADSL Home Gateway at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WAG200G - Wireless-G ADSL Home Gateway in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info