602177

Linksys SRW2008MP Manual

40
Zoom out
Zoom in
Previous page
1/81
Next page
Chapter 5
Advanced Configuration
34
8-Port 10/100/1000 Gigabit Switch with Webview
Security > 802.1x Settings
Security > 802.1x Settings
Port based authentication enables authenticating system
users on a per-port basis via an external server. Only
authenticated and approved system users can transmit
and receive data. Ports are authenticated via the RADIUS
server using the Extensible Authentication Protocol
(EAP).
Enable 802.1x Place a checkmark in the check box to
enable 802.1x authentication.
Port Indicates the port name.
Status Port Control Specifies the port authorization
state. The possible field values are as follows:
Force-Authorized • The controlled port state is set to
Force-Authorized (forward traffic).
Force-Unauthorized • The controlled port state is set
to Force-Unauthorized (discard traffic).
Enable Periodic Reauthentication Permits immediate
port reauthentication.
Setting Timer The Setting Timer button opens the
Setting Timer screen to configure ports for 802.1x
functionality.
Setting Timer
802.1x Settings > Setting Timer
Port Indicates the port name.
Reauthentication Period Specifies the number of
seconds in which the selected port is reauthenticated
(Range: 300-4294967295). The field default is 3600
seconds.
Quiet Period Specifies the number of seconds that
the switch remains in the quiet state following a failed
authentication exchange (Range: 0-65535).
Resending EAP Specifies the number of seconds that the
switch waits for a response to an EAP - request/identity
frame, from the supplicant (client), before resending the
request.
Max EAP Requests The total amount of EAP requests
sent. If a response is not received after the defined period,
the authentication process is restarted. The field default
is 2 retries.
Supplicant Timeout Displays the number of seconds that
lapses before EAP requests are resent to the supplicant
(Range: 1-65535). The field default is 30 seconds.
Server Timeout Specifies the number of seconds
that lapses before the switch resends a request to the
authentication server (Range: 1-65535). The field default
is 30 seconds.
Security > Ports Security
Security > Ports Security
Network security can be increased by limiting access on
a specific port only to users with specific MAC addresses.
MAC addresses can be dynamically learned or statically
configured. Locked port security monitors both received
and learned packets that are received on specific ports.
Access to the locked port is limited to users with specific
MAC addresses. These addresses are either manually
defined on the port, or learned on that port up to the
point when it is locked. When a packet is received on a
locked port, and the packet source MAC address is not tied
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys SRW2008MP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys SRW2008MP in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info