612965

Linksys RE2000 Manual

106
Zoom out
Zoom in
Previous page
1/457
Next page
6
Contents
Linksys Wireless-N Range Extender
If the extender has already been set up
On a Microsoft Windows XP computer:
TIP
To follow these instructions, UPnP needs to be enabled in
WindowsXP. To enable UPnP:
1. 
Click Start, Control Panel, Add or Remove Program, then click
Add/Remove Windows Components.
2. 
Select Network Services, then click Details.
3. 
Select UPnP User Interface, then click OK.
1. 
Open Windows Explorer, then click My Network Places on the left panel.
The RE1000/RE2000 icon appears on the right panel. (You might be
required to change the firewall settings to allow the display of networked
computers. Refer to your operating system’s help for instructions.)
2. 
Double-click the RE1000/RE2000 icon. Your web browser opens and
you are prompted for your User Name and Password.
3. 
Leave the User Name field blank, then enter the password you created
during Setup.
4. 
Click OK.
On a Microsoft Windows 8, Windows 7, or Vista computer:
1. 
Open Windows Explorer (File Explorer in Windows 8), then click Network.
The RE1000/RE2000 icon appears on the right panel. (You might be
required to change the firewall settings to allow the display of networked
computers. Refer to your operating system’s help for instructions.)
2. 
Right-click the RE1000/RE2000 icon, then click Properties. Click on the
address link in Device webpage. Your web browser opens, and you are
asked for a User Name and Password.
3. 
Leave the User Name blank, and enter the password you have created.
4. 
Click OK.
On a Mac OS X computer:
Every Mac computer has Bonjour networking technology, which a Mac
uses to communicate with basic devices such as cell phones and iPods.
1. 
Open Safari, click the book icon, then click Bonjour on the left panel.
The RE1000/RE2000 icon appears on the bottom right panel.
2. 
Double-click the RE1000/RE2000 icon. You are asked for a User Name 
and Password.
3. 
Leave the User Name blank, and enter the password you have created.
4. 
Click OK.
How to use the browser-based utility
If you change any settings on a screen, you must click Save Settings to apply
your changes, or click Cancel Changes to clear your changes. These controls
are located at the bottom of each screen. Click Help on the right side of the
screen for additional information on the screen’s options.
… 106 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys RE2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys RE2000 in the language / languages: All languages as an attachment in your email.

The manual is 10,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info