612965
77
Zoom out
Zoom in
Previous page
1/457
Next page
9
Erste Schritte
Wireless-N Reichweiten-Extender
Verbindung mit der PIN des Extenders herstellen
Verwenden Sie diese Methode, wenn Ihr Client-Gerät nach der PIN des Extenders fragt.
1. 
Geben Sie im Client-Gerät die PIN ein, die im Bildschirm Wi-Fi Protected Setup des
Extenders aufgeführt ist. (Diese finden Sie auch auf der Unterseite des Extenders.)
Wenn die Verbindung hergestellt wurde, leuchtet die Anzeige Wi-Fi Protected
Setup am Extender kontinuierlich.
2. 
Klicken Sie innerhalb von zwei Minuten im Bildschirm Wi-Fi Protected Setup des
Extenders auf OK.
TIPP
Wenn Sie Client-Geräte haben, die Wi-Fi Protected Setup nicht
unterstützen, notieren Sie die Wireless-Einstellungen, und nehmen
SiedieKonfiguration dieser Client-Geräte manuell vor.
So nutzen Sie die Netzwerksuche
Die Netzwerksuche gibt Ihnen eine kurze Übersicht über alle Access Points und Wireless-
Router innerhalb der Reichweite des Extenders.
So öffnen Sie die Seite „Site Survey“ (Netzwerksuche):
1. 
Melden Sie sich beim browserbasierten Dienstprogramm an (siehe So öffnen Sie 
das browserbasierte Dienstprogramm“ auf Seite 5
).
2. 
Klicken Sie auf die Registerkarte Wireless und dann auf die Seite Site Survey
(Netzwerksuche).
Select  (Auswählen) Wählen: Klicken Sie auf die Schaltfläche neben dem
Wireless-Netzwerknamen (SSID) in der Spalte Wählen und anschließend auf
Verbinden, um eine Verbindung zu einem Wireless-Netzwerk herzustellen.
SSID: Zeigt den Namen benachbarter Wireless-Netzwerke an.
GHzZeigt das Frequenzband (in GHz) der Wireless-Netzwerke in der Nähe an.
(Diese Spalte ist nur beim Modell RE2000 vorhanden.)
Signal Strength (Signalstärke): Zeigt die relative Position benachbarter APs
über
die Stärke des empfangenen Wireless-Signals an: 1Balken = 20%, 2Balken=
40%,
3Balken = 60%, 4Balken = 80%, 5Balken = 100%. Wenn kein Balken angezeigt
wird, ist der Extender zu weit vom Upstream-AP entfernt. Versuchen Sie, eine
Signalstärke von 60% bis 100% beizubehalten, um eine optimale Leistung zu
garantieren. Eine sorgfältig Netzwerksuche hilft, diesen Wert innerhalb eines
akzeptablen Bereichs zu halten und so für optimale Leistung zusorgen.
Security (Sicherheit): Zeigt den Sicherheitsmodus benachbarter APs an. Wenn
das Netzwerk Wi-Fi Protected Setup unterstützt, wird auch das Symbol für Wi-Fi
Protected Setup angezeigt.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys RE2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys RE2000 in the language / languages: All languages as an attachment in your email.

The manual is 10,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info