727826
45
Zoom out
Zoom in
Previous page
1/77
Next page
41
Firewall
Linksys
41
Firewall
Firewall General Settings
General
The firewall is enabled by default. If the firewall is set as disabled, features such
as SPI, DoS, and outbound packet responses will be turned off automatically.
Meanwhile, the remote management feature will be activated. The network
access rules and content filter will be turned off.
NOTE Remember to click Save to save your settings before leaving the page.
You can also click Cancel to undo the changes.
Firewall Turn on/off the firewall.
SPI (Stateful Packet Inspection) Enables the packet automatic
authentication detection technology.
The firewall operates mainly at the
network layer. By running the dynamic
authentication for each connection, it
will also perform an alarming function
for application procedure. Meanwhile,
the packet authentication firewall may
decline the connections that use non-
standard communication protocol.
DoS (Denial of Service) Prevents DoS attacks such as SYN
Flooding, Smurf, LAND, Ping of Death,
IP Spoofing and so on.
Block WAN Request When enabled, shuts down outbound
ICMP and abnormal packet responses
in connection. Default value is
enabled, which prevents users from
pinging the WAN IP from outside the
network.
Remote Management Must be enabled to enter the devices
Web-based UI remotely. A valid
external IP address (WAN IP) for the
device should be filled in and the
modifiable default control port should
be adjusted (the default is set to 80,
modifiable).
HTTPS Multicast Pass Through HTTPS is more secure. This feature
allows user to turn on HTTPS.
There are many audio and visual
streaming media on the network.
Broadcasting may allow the client end
to receive this type of packet message
format. This feature is off by default.
UPnP This feature allows users to enable/
disable UPnP.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys LRT224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys LRT224 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info