602220

Linksys EPC3008 Cable Modem Manual

20
Zoom out
Zoom in
Previous page
1/21
Next page
18
FAQs and Troubleshooting
Linksys DPC3008/EPC3008
The modem does not register an Ethernet connection
• Verify that your computer has an Ethernet card and that the Ethernet
driver software is properly installed. If you purchase and install an
Ethernet card, follow the installation instructions.
• Verify the status of the front panel status indicator lights.
The modem does not register an Ethernet connection after
connecting to a hub
If you are connecting multiple computers to the modem, you should
first connect the modem to the uplink port of the hub using the correct
crossover cable. The LINK LED of the hub will illuminate continuously.
The modem does not register a cable connection
• The modem works with a standard, 75-ohm RF coaxial cable. If you
are using a different cable, your modem will not function properly.
Contact your service provider to determine whether you are using the
correct cable.
Tips for improved performance
Check and correct
If your modem does not perform as expected, the following tips may help. If
you need more help, contact your service provider.
• Verify that the plug to your modem’s AC power is properly inserted into
an electrical outlet.
• Verify that your modem’s AC power cord is not plugged into an electrical
outlet that is controlled by a wall switch. If a wall switch controls the
electrical outlet, make sure the switch is turned on.
• Verify that the modem’s ONLINE LED status indicator is on.
• Verify that your cable service is active and that it supports two-way
service.
• Verify that all cables are properly connected and that you are using the
correct cables.
• If you are using the Ethernet connection, verify that your TCP/IP is
properly installed and configured.
• Verify that you have called your service provider and given them the
serial number and MAC address of your modem.
• If you are using a cable signal splitter so that you can connect the modem
to other devices, remove the splitter and reconnect the cables so that
the modem is connected directly to the cable input. If the modem now
functions properly, the cable signal splitter may be defective and may
need to be replaced.
• If you are connected to your computer with an Ethernet connection,
your computer should be equipped with a Gigabit Ethernet card for best
performance.
… 20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys EPC3008 Cable Modem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys EPC3008 Cable Modem in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info