602220

Linksys EPC3008 Cable Modem Manual

11
Zoom out
Zoom in
Previous page
1/21
Next page
9
Product Overview
Linksys DPC3008/EPC3008
Management
• Software upgradeable by network download
• Remote manageability using SNMP V1/V2 and V3
Front panel
The front panel of your modem provides LED status indicators that indicate
how well and at what state your modem is operating. See “Understanding the
Front Panel Indicators” on page 14 for more information.
1.
POWER—ON, power is applied to the modem.
2.
DS—ON, the modem is receiving data from the cable network.
3.
US—ON, the modem is sending data to the cable network.
4.
ONLINE—ON, the modem is registered on the network and fully
operational.
5.
LINK—ON, the Ethernet connection is operational. BLINKING indicates
that data is being transferred over the Ethernet connection. OFF indicates
that the Ethernet connection is not connected or has been disabled by
the user.
NOTE
After the modem is successfully registered on the network, the
POWER, DS, US, and ONLINE LEDs stay on continuously to indicate
that the modem is active and fully operational.
Back panel
DPC3008
EPC3008
1.
ON/OFF SWITCH (Provided only on products that carry the CE mark)—
Allows you to turn off of the modem without removing the power cord.
Turning the modem off using this switch makes sure that the modem is
consuming no energy.
2.
POWER—Connects the modem to the provided AC power adapter. Use
only the power supply provided with your modem.
3.
ETHERNET—One RJ-45 Ethernet port connects to the Ethernet port on
your computer or network.
4.
RESET—Press and hold this switch for 2 seconds to restore settings to
factory defaults and reboot the modem.
CAUTION
The RESET button is for maintenance purposes only. Do not use
unless instructed to do so by your service provider. Doing so may
cause you to lose any settings you have selected.
5.
MAC ADDRESS LABEL—Displays the MAC address of the modem.
6.
CABLE—F-connector connects to an active cable signal from your
service provider.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys EPC3008 Cable Modem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys EPC3008 Cable Modem in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info