590197

Linksys E900 Manual

48
Zoom out
Zoom in
Previous page
1/92
Next page
36
Setting Up: Advanced
Linksys E-Series
How to use a router as an access point
How can I use this new router as an access point? If you have a large area to
cover with your wireless signal, or if part of your home has weak signals due to
interference, you can use this router to extend the range of your old router’s
wireless network.
For ALL
To set up your new router as an access point:
Setup > Basic Setup
1.
Use a network cable to connect this router’s Internet port to the Ethernet
or LAN port on the router that is connected to your modem.
2.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 25).
3.
Click the Setup tab, then click the Basic Setup page.
4.
For Internet Connection Type, select Bridge Mode.
5.
Click Save Settings to apply the changes. The new router’s LAN IPaddress
will be changed and obtained from the router that is connected to your
modem.
IMPORTANT
While in Bridge Mode, the following browser-based utility pages
will be unavailable:
•Setup tab: IPv6 Setup, DDNS, MAC Address Clone, Advanced
Routing
•Security tab: all pages
•Access Restrictions tab: all pages
•Applications & Gaming tab: all pages
•Administration tab: Log
For ALL
How can I use my old router as an access point? If you have a large area to
cover with your wireless signal, or if part of your home has weak signals due to
interference, you can use your old router to extend the range of your wireless
network. This is a complex process, so this procedure assumes that you have
some networking knowledge.
TIP
Check the documentation for your old router. Some brands of
routers include either a switch on the outside of the case or a
software option to convert it to an access point. If either of these
options is available, follow your old router’s instructions to convert
it to an access point.
You need to take note of your new router’s settings, then apply some of those
settings to the old router so it can work as an access point.
To view your new router’s settings:
Wireless > Basic Wireless Settings (non-E4200)
Wireless > Wireless Security (non-E4200)
Wireless > Wireless Settings (E4200)
Status > Wireless Network
Setup > Basic Setup
1.
Make sure that your new router is connected to the Internet.
2.
In the browser-based utility, click the Wireless tab
3.
For the E4200, click Wireless Settings and take note of the Network
Name (SSID), Security Mode, and Passphrase.
Or, for other Linksys router models:
a.
Click the Basic Wireless Settings page and take note of the Network
Name (SSID).
b.
Click the Wireless tab, then click the Wireless Security page and
take note of the Security Mode and the passphrase.
4.
Click the Status tab, then click the Wireless Network page and take note
of the Channel.
5.
Click the Setup tab, then click the Basic Setup page and take note of
the DHCP server’s IP Address range (192.168.1.100 to 192.168.1.149 by
default)
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys E900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys E900 in the language / languages: English as an attachment in your email.

The manual is 8,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Linksys E900

Linksys E900 User Manual - German - 25 pages

Linksys E900 User Manual - Dutch - 25 pages

Linksys E900 User Manual - All languages - 761 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info