Manual Linksys E3000 - High Performance Wireless-N router (page 19 of 80) (English)

496697

Zoom out

Zoom in

1/80

High Performance Wireless-N Router

Linksys E3000 Chapter 3: Advanced Configuration

Size When Manual is selected in the MTU field, this option

is enabled. Leave this value in the 1200 to 1500 range. The

default size depends on the Internet Connection Type:

• DHCP, Static IP, or Telstra: 1500

• PPPoE: 1492

• PPTP or L2TP: 1460

Network Setup

The Network Setup section configures the IP settings for

your local network.

Router Address

This presents both the Router’s IP Address and Subnet

Mask, as seen by your network.

Router IP Address

IP Address This is the IP address of the router and is used

as the base for all of your local network settings.

Subnet Mask This is the subnet mask address for your

router. It offers a selection of addresses from a drop-down

menu. Most users will not need to change this setting.

DHCP Server Settings

The settings allow you to configure the Router’s DHCP

server function. The Router can be used as a DHCP server

for your network. A DHCP server automatically assigns an

IP address to each computer or device on your network.

If you choose to enable the Router’s DHCP server option,

make sure there is no other DHCP server on your network.

NOTE: If you choose to enable the DHCP server

option, make sure there is no other DHCP server

on your network.

Network Address Server Settings (DHCP)

DHCP Server DHCP is enabled by factory default. If you

already have a DHCP server on your network, or you do

not want a DHCP server, then select Disabled (no other

DHCP features will be available).

DHCP Reservation Click this button if you want to

assign a fixed local IP address to a specific device on your

network. This is helpful if you have a device you need to

access at the same address all the time such as a media

server or print server. You can reserve the IP address for

the specific device by selecting it from the list of devices

or by manually entering the MAC address of the device.

DHCP Reservation

You will see a list of DHCP clients with the following

information: Client Name, Interface, IP Address, and

MAC Address.

DHCP Reservation

• Select Clients from DHCP Table Click the Select

check box to reserve a client’s IP address. Then click

Add Clients. Enter a Client Name and click Save

Settings.

• Manually Add Client To manually assign an IP

address, enter the client’s name in the Enter Client

Name field. Enter the IP address you want it to have

in the Assign IP Address field. Enter its MAC address in

the To This MAC Address field. Then click Add and click

Save Settings.

Clients Already Reserved

A list of DHCP clients and their fixed local IP addresses

will be displayed at the bottom of the screen. If you

want to remove a client from this list, click Remove.

Click Save Settings to apply your changes, or click

Cancel Changes to clear your changes. To update

the on-screen information, click Refresh. To exit this

screen, click Close.

Start IP Address The Start IP Address specifies the

starting IP address for the range of addresses assigned

by your Router when it functions as a DHCP server. (The

first IP address assigned by the Router will be randomly

selected within the range you specify.)

Because the Router’s default IP address is 192.168.1.1,

the Start IP Address must be 192.168.1.2 or greater, but

smaller than 192.168.1.254. The default Start IP Address is

192.168.1.100.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Linksys E3000 - High Performance Wireless-N router in the language / languages: English as an attachment in your email.

The manual is 6,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Linksys E3000 - High Performance Wireless-N router

Linksys E3000 - High Performance Wireless-N router User Manual - German - 54 pages

Linksys E3000 - High Performance Wireless-N router User Manual - Dutch - 53 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Linksys E3000 - High Performance Wireless-N router Manual

Product: