Manual Linksys E2000 Advanced Wireless-N (page 19 of 59) (English)

602223

Zoom out

Zoom in

1/59

Advanced Wireless-N Router

Linksys E2000 Chapter 3: Advanced Configuration

Host Name and Domain Name These fields allow you to

supply a host and domain name for the Router. Some ISPs,

usually cable ISPs, require these names as identification.

You may have to check with your ISP to see if your

broadband Internet service has been configured with a

host and domain name. In most cases, leaving these fields

blank will work.

MTU MTU is the Maximum Transmission Unit. It specifies

the largest packet size permitted for Internet transmission.

Select Manual if you want to manually enter the largest

packet size that is transmitted. To have the Router select

the best MTU for your Internet connection, keep the

default setting, Auto.

Size When Manual is selected in the MTU field, this option

is enabled. Leave this value in the 1200 to 1500 range. The

default size depends on the Internet Connection Type:

• DHCP, Static IP, or Telstra: 1500

• PPPoE: 1492

• PPTP or L2TP: 1460

Network Setup

The Network Setup section configures the IP settings for

your local network.

Router IP

IP Address The Router’s IP address, as seen by your

network, is displayed. The default Router IP address is

192.168.1.1.

Subnet Mask The Router’s Subnet Mask, as seen by your

network, is displayed.

Router IP

DHCP Server Setting

The settings allow you to configure the Router’s DHCP

server function. The Router can be used as a DHCP server

for your network. A DHCP server automatically assigns an

IP address to each computer or device on your network.

If you choose to enable the Router’s DHCP server option,

make sure there is no other DHCP server on your network.

DHCP Server Setting

DHCP Server DHCP is enabled by factory default. If you

already have a DHCP server on your network, or you do

not want a DHCP server, then select Disabled (no other

DHCP features will be available).

DHCP Reservation Click DHCP Reservation if you want

to assign a fixed local IP address to a MAC address.

DHCP Reservation

You will see a list of DHCP clients with the following

information: Client Name, Interface, IP Address, and

MAC Address.

DHCP Reservation

• Select Clients from DHCP Table Click the Select

check box to reserve a client’s IP address. Then click

Add Clients.

• Manually Adding Client To manually assign an IP

address, enter the client’s name in the Enter Client

Name field. Enter the IP address you want it to have in

the Assign IP Address field. Enter its MAC address in the

To This MAC Address field. Then click Add.

Clients Already Reserved

A list of DHCP clients and their fixed local IP addresses

will be displayed at the bottom of the screen. If you

want to remove a client from this list, click Remove.

Click Save Settings to apply your changes, or click

Cancel Changes to clear your changes. To view the

most up-to-date information, click Refresh. To exit this

screen, click Close.

Start IP Address The Start IP Address specifies the

starting IP address for the range of addresses assigned

by your Router when it functions as a DHCP server. (The

first IP address assigned by the Router will be randomly

selected within the range you specify.)

Because the Router’s default IP address is 192.168.1.1,

the Start IP Address must be 192.168.1.2 or greater, but

smaller than 192.168.1.254. The default Start IP Address is

192.168.1.100.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Linksys E2000 Advanced Wireless-N in the language / languages: English as an attachment in your email.

The manual is 3,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Linksys E2000 Advanced Wireless-N

Linksys E2000 Advanced Wireless-N User Manual - German - 32 pages

Linksys E2000 Advanced Wireless-N User Manual - Dutch - 33 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Linksys E2000 Advanced Wireless-N Manual

Product: