590196
41
Zoom out
Zoom in
Previous page
1/92
Next page
29
Setting Up: Advanced
Linksys E-Series
On the 2.4 GHz band, you can select:
Auto (20 MHz or 40Mhz)
20 MHz Only
d.
Channel—Choose the operating channel for each band. Your
router will automatically select the channel with the least amount of
interference if you leave the default Auto or Auto (DFS) setting. We
recommend keeping the default settings for both bands.
e.
SSID Broadcast—When wireless clients look for wireless networks to
connect to, they detect the SSID (wireless network name) broadcast
by the router. To broadcast your router’s SSID, keep the default setting
(Enabled). If you do not want to broadcast the router’s SSID, select
Disabled. We recommend keeping the default setting (Enabled) for
both bands.
f.
Security Mode (setting is on this page for the E4200, and on the
Wireless>Wireless Security page for other routers)—The 5GHz and
2.4 GHz networks can use different security options. Select the
security option for each wireless network. If the security mode you
select requires a passphrase, a Passphrase field appears, and you must
enter a passphrase.
TIP
Wireless-N networks should use the WP2-Personal security
mode for best performance.
4.
To apply your changes, click Save Settings at the bottom of the screen.
How to set up the DHCP server on your
router
For ALL
Your router can be used as a DHCP (Dynamic Host Configuration Protocol)
server to automatically assign an IP address to each computer or device on
your network. The DHCP server is enabled by default. If you already have a
DHCP server on your network, or if you do not want to use your router as a
DHCP server, you should disable this setting.
To configure your router’s DHCP server settings:
Setup > Basic Setup > DHCP Server Settings
1.
Log into the browser-based utility (see “How to open the browser-based
utility on page 25).
2.
Click the Setup tab, then click the Basic Setup page.
3.
Review the DHCP Server Setting fields (in the middle of the screen). You
can:
Enable or disable the DHCP server.
Change the starting address for the DHCP server.
Change the number of users (253 maximum).
4.
If you change any of the settings, click Save Settings at the bottom of
the page.
TIP
For field descriptions, click Help on the right side of the screen.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys E-Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys E-Series in the language / languages: English as an attachment in your email.

The manual is 8,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Linksys E-Series

Linksys E-Series User Manual - German - 25 pages

Linksys E-Series User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info