602218
43
Zoom out
Zoom in
Previous page
1/64
Next page
Manual Setup
36
Controller/Wireless-N Touchscreen Remote
Wireless Home Audio
Manual Setup
EasyLink Advisore is the recommended method of
installing the Controller but the Controller can be installed
into an existing Wireless Home Audio system without the
use of EasyLink Advisor.
NOTE: The installation process is simplified with
the use of the EasyLink Advisor software and it
is necessary to use EasyLink Advisor to set up
your Internet services.
The following instructions will guide you through the
necessary steps to get up and running with your existing
Wireless Home Audio setup.
Installing the Battery
The Controller comes with a battery that needs to be
installed and charged. You can use the Controller as the
battery is being charged.
To install the battery, perform the following steps:
Open the battery compartment.1.
Align the battery so that the notches line up with the 2.
grooves on the Controller. The plus and minus symbol
should align to the connectors on the Controller.
Slide the battery towards the battery connectors until 3.
the battery is connected.
Plus and MinusNotches
NOTE: The battery connectors on the Controller
should line up with the + and - symbols on the
battery.
Charging the Battery
The Controller includes two charging options. One
connects the Controller to the computer to charge and
the other connects to a standard power outlet.
Charging with the Power Adapter
Connect the power adapter to a power outlet. 1.
Connect the other end with the mini-USB connector 2.
to the Controller.
Charging with the USB Cable
Connect the end of the USB Cable with the mini-USB 1.
connector to the Controller.
Connect the other end of the USB Cable to a powered 2.
USB slot.
Battery Status The battery status icon will
indicate the power remaining on the battery.
A message will appear when the battery
power is low.
Battery Charging When the battery is
plugged into a power source and charging,
this icon will be displayed in the upper left
corner of the LCD touchscreen.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys DMRW1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys DMRW1000 in the language / languages: English as an attachment in your email.

The manual is 11,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info