602208

Linksys BEFW11S4 Wireless-B BroadBand Router Manual

23
Zoom out
Zoom in
Previous page
1/68
Next page
17
Chapter 5: Configuring the Wireless-B Broadband Router
The Wireless Tab - Wireless Security
Wireless-B Broadband Router
The Wireless Tab - Wireless Security
The Wireless Security settings configure the security of your wireless network. Click the radio button next to
Enable to enable Wireless Security before choosing your options. Click the radio button next to Disable if you
need to disable Wireless Security.
There are four wireless security mode options supported by the Router, WPA, RADIUS, and WEP. These four are
briefly discussed here.
WPA Pre-Shared Key. WPA provides the TKIP encryption method, with dynamic encryption keys. Enter a Pre-
Shared key of 8-32 characters, and enter a Group Key Renewal period, which instructs the Router how often it
should change the encryption keys.
WPA Radius. WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is
connected to the Router.) Enter the RADIUS server’s IP Address and port number, along with a key shared
between the Router and the server. Then, enter a Group Key Renewal period, which instructs the Router how
often it should change the encryption keys.
Radius. WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is
connected to the Router.) First, enter the RADIUS server’s IP Address and port number, along with a key shared
between the Router and the server. Then, select a level of WEP encryption, and either generate a WEP key
through the Passphrase or select a WEP key and a enter the WEP key manually.
• WEP Encryption Level. An acronym for Wired Equivalent Privacy, WEP is an encryption method used to protect
your wireless data communications. WEP uses 64-bit or 128-bit keys to provide access control to your
network and encryption security for every data transmission. To decode data transmissions, all devices in a
network must use an identical WEP key. Higher encryption levels offer higher levels of security, but due to the
complexity of the encryption, they may decrease network performance. To enable WEP, select 64 bits (10
hex digits) or 128 bits (26 hex digits). To disable WEP encryption, keep the default setting, No Encryption.
• Passphrase. Instead of manually entering WEP keys, you can enter a passphrase. This passphrase is used to
generate one or more WEP keys. It is case-sensitive and should not be longer than 31 alphanumeric
characters. (This Passphrase function is compatible with Linksys wireless products only and cannot be used
with Windows XP Zero Configuration. If you want to communicate with non-Linksys wireless products or
Windows XP Zero Configuration, make a note of the WEP key generated in the Key 1 field, and enter it
manually in the wireless client.) After you enter the Passphrase, click the Generate button to create WEP
keys.
Figure 5-14: WPA Pre-Shared Key
Figure 5-15: WPA Radius
Figure 5-16: Wireless Tab - Radius
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFW11S4 Wireless-B BroadBand Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFW11S4 Wireless-B BroadBand Router in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info