602208

Linksys BEFW11S4 Wireless-B BroadBand Router Manual

17
Zoom out
Zoom in
Previous page
1/68
Next page
11
Chapter 5: Configuring the Wireless-B Broadband Router
The Setup Tab - Basic Setup
Wireless-B Broadband Router
button. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet
connection terminates.
Keep Alive:Redial Period. If you select this option, the Router will periodically check your Internet connection.
If you are disconnected, then the Router will automatically re-establish your connection. To use this option,
click the radio button next to Keep Alive. In the Redial Period field, you specify how often you want the Router
to check the Internet connection. The default Redial Period is 30 seconds.
• RAS. (for SingTel Users)
RAS is a service used in Singapore only. If you are using a RAS connection, check with your ISP for the
necessary setup information.
• PPTP. Point to Point Tunneling Protocol (PPTP), is a service that applies to connections in Europe only.
IP Address. This is the Router’s IP address, as seen from the Internet. Your ISP will provide you with the IP
Address you need to specify here.
Subnet Mask This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP
will provide you with the Subnet Mask.
Default Gateway. Your ISP will provide you with the Default Gateway Address.
User Name and Password. Enter the User Name and Password provided by your ISP.
Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as
soon as you attempt to access the Internet again. If you wish to activate this option, click the radio button
next to Connect on Demand. In the Max Idle Time field, enter the number of minutes you want to have
elapsed before your Internet connection terminates.
Keep Alive: Redial Period. If you select this option, the Router will periodically check your Internet
connection. If you are disconnected, then the Router will automatically re-establish your connection. To use
this option, click the radio button next to Keep Alive. In the Redial Period field, you specify how often you
want the Router to check the Internet connection. The default Redial Period is 30 seconds.
• Heart Beat Signal is a service used in Australia only. If you are using a Heart Beat Signal connection, check
with your ISP for the necessary setup information.
static ip address: a fixed address assigned to a
computer or device connected to a network
Figure 5-5: PPPoE Connection Type
subnet mask: An address code that determines
the size of the network.
Figure 5-7: PPTP Connection Type
Figure 5-6: RAS Connection Type
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFW11S4 Wireless-B BroadBand Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFW11S4 Wireless-B BroadBand Router in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info