602206
14
Zoom out
Zoom in
Previous page
1/45
Next page
Chapter 3
Advanced Configuration
10
EtherFast Cable/DSL VPN Router with 4-Port Switch
VPN Tunnel
The Router creates a tunnel between two endpoints,
so that the data traveling between these endpoints is
secure.
Select Tunnel Entry Select the tunnel you wish to create.
It is possible to create up to 50 simultaneous tunnels.
Delete To delete a tunnel, select it from the drop-down
menu, and then click Delete.
Summary To view summary information about a tunnel,
select it from the drop-down menu, and then click
Summary.
VPN Tunnel To enable a tunnel, select it from the drop-
down menu, and then click Enabled. To disable a tunnel,
select Disabled.
Tunnel Name Enter a name for this VPN tunnel, such as
Los Angeles Office, Chicago Branch, or New York Division.
This allows you to identify multiple tunnels and does not
have to match the name used at the other end of the
tunnel.
Interface Select the appropriate WAN port, WAN1 or
WAN2 (available if the Dual WAN feature is enabled).
Enable Check this box to enable a VPN tunnel. (When
you create a VPN tunnel, this check box will be disabled.)
Local Secure Group and Remote Secure Group
A Local Secure Group is a computer(s) on your network
that can access the tunnel. A Remote Secure Group is a
computer(s) on the remote end of the tunnel that can
access the tunnel. For the Local Secure Group, select
Subnet, IP Address, or IP Range. For the Remote Secure
Group, select Subnet, IP Address, IP Range, Host, or
Any.
NOTE: The Local Secure Group you select should
match the Remote Secure Group selected on
the VPN device at the other end of the tunnel.
Local and Remote Secure Group
Subnet
The default is Subnet. All computers on the local subnet
will be able to access the tunnel.
IP and Mask Enter the appropriate addresses. The default
value of 0 should remain in the last fields of the IP and
Mask settings.
IP Address
Only the computer with a specific IP address will be able
to access the tunnel.
IP Addr. Enter the appropriate address.
IP Range
This option is a combination of the Subnet and IP Address
options.
IP Range Specify a range of IP addresses within the
subnet that will have access to the tunnel.
Host and Any are options for the Remote Secure Group
only.
Host
The Remote Secure Group will be the same as the Remote
Security Gateway Setting: IP Address, FQDN (Fully Qualified
Domain Name), or Any.
Any
The local VPN Router will accept a request from any IP
address. Select this option when the other endpoint is
using DHCP or PPPoE on the Internet side.
Remote Security Gateway
The Remote Security Gateway is the VPN device, such as a
second VPN Router, on the remote end of the VPN tunnel.
Select IP Address, FQDN, or Any.
Remote Security Gateway
IP Address
IP Addr. Enter the IP address of the VPN device on the
other end of the tunnel. The remote VPN device can be
another VPN Router, a VPN server, or a computer with VPN
client software that supports IPSec. Make sure that you
have entered the address correctly.
NOTE: Make sure you enter the IP address of the
remote VPN device, NOT the local VPN Router.
FQDN
FQDN Enter the Fully Qualified Domain Name (FQDN) of
the VPN device at the other end of the tunnel. The remote
VPN device can be another VPN Router, a VPN server,
or a computer with VPN client software that supports
IPSec. The FQDN is the host name and domain name
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFVP41 EtherFast Cable-DSL VPN Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFVP41 EtherFast Cable-DSL VPN Router in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info