602205
12
Zoom out
Zoom in
Previous page
1/43
Next page
Chapter 2
Advanced Configuration
9
Broadband Firewall Router with 4-Port Switch/VPN Endpoint
computers. Select Enabled to filter multicasting. This
feature is disabled by default.
Filter Internet NAT Redirection This feature uses port
forwarding to block access to local servers from local
networked computers. Select Enabled to filter Internet
NAT redirection. This feature is disabled by default.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Security > VPN
The VPN screen allows you to enable VPN tunnels.
Security > VPN
VPN Passthrough
IPSec Passthrough Internet Protocol Security (IPSec) is
a suite of protocols used to implement secure exchange
of packets at the IP layer. To allow IPSec tunnels to pass
through the Router, keep the default, Enabled.
PPPoE Passthrough Point-to-Point over Ethernet
(PPPoE) Passthrough allows your computer(s) to use the
PPPoE client software provided by your ISP. Some ISPs
may request that you use this feature on the Router. To
allow PPPoE Passthrough, keep the default, Enabled.
PPTP Passthrough Point-to-Point Tunneling Protocol
(PPTP) allows the Point-to-Point Protocol (PPP) to be
tunneled through an IP network. To allow PPTP tunnels to
pass through the Router, keep the default, Enabled.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
VPN Tunnel
Security > VPN Tunnel
Establishing a Tunnel
The Router creates a tunnel or channel between two
endpoints, so that the data or information between these
endpoints is secure. To establish this tunnel, select the
tunnel you wish to create in the Select Tunnel Entry drop-
down box. It is possible to create up to two simultaneous
tunnels. To delete a tunnel, click the Delete button. To view
a summary of that tunnel, click the Summary button.
Then check the box next to Enable to enable the tunnel.
Once the tunnel is enabled, enter the name of the tunnel
in the Tunnel Name field. This is to allow you to identify
multiple tunnels and does not have to match the name
used at the other end of the tunnel.
Local Secure Group and Remote Secure Group
A Local Secure Group is a computer(s) on your network
that can access the tunnel. A Remote Secure Group is a
computer(s) on the remote end of the tunnel that can
access the tunnel. Under Local Secure Group and Remote
Secure Group, you may choose one of three options:
Subnet, IP Address, and IP Range. Under Remote Secure
Group, you have two additional options: Host and Any.
Subnet If you select Subnet (which is also the default),
this will allow all computers on the local subnet to access
the tunnel. When using the Subnet setting, the default
values of 0 should remain in the last fields of the IP and
Mask settings.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFSX41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFSX41 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info