602201
11
Zoom out
Zoom in
Previous page
1/39
Next page
Chapter 2
Advanced Configuration
8
EtherFast Cable/DSL Router with 8-Port Switch
Security > Filter
The Filter screen is used to set up filters to block specific
internal users from accessing the Internet and enhance
your network’s security.
Security > Filter
Filter IP Address Range
You can create up to five different IP Address Range filters.
Users who have filtered IP addresses will not be able to
access the Internet at all. If you only want to filter one IP
address instead of a range of IP addresses, enter the same
value into both fields. For instance, if you wish to filter the
PC with the IP address of 192.168.1.5, enter 5 into both
fields on one line: 192.168.1.5 ~ 192.168.1.5.
Start Enter the starting IP address of the range you wish
to filter.
End Enter the ending IP address of the range you wish
to filter.
Filter Port Range
You can create up to five different Port Range filters. Users
connected to the Router will no longer be able to access
any port number listed here.
Protocol Select the protocol you want to filter, TCP, UDP,
or Both.
Start Enter the starting port number of the range you
wish to filter.
End Enter the ending port number of the range you wish
to filter.
Filter MAC Address
This feature blocks computers with specific MAC addresses
from going out to the Internet.
Edit MAC Filter Setting To set the MAC filter, click Edit
MAC Filter Setting.
Filter > MAC Access Control Table
Use the MAC Access Control Table to select the MAC
addresses you want to filter.
Filtered MAC Address Select the range of MAC
address entries.
mac 1-10 Enter the MAC address.
Click Apply before closing the window. To cancel
changes, click Undo.
Block WAN Requests
Use these features to enhance your network’s security and
filter multicasting.
Block Anonymous Internet Requests This feature
makes it more difficult for outside users to work their
way into your network. This feature is enabled by default.
Select Disabled to allow anonymous Internet requests
.
Filter Multicast Multicasting allows for multiple
transmissions to specific recipients at the same time. If
multicasting is permitted, then the Router will allow IP
multicast packets to be forwarded to the appropriate
computers. Select Enabled to filter multicasting. This
feature is disabled by default.
Filter Internet NAT Redirection This feature uses port
forwarding to block access to local servers from local
networked computers. Select Enabled to filter Internet
NAT redirection. This feature is disabled by default.
Filter IDENT (Port 113) This feature keeps port 113 from
being scanned by devices outside of your local network.
This feature is enabled by default. Select Disabled to allow
port 113 to be scanned.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFSR81 EtherFast Cable-DSL Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFSR81 EtherFast Cable-DSL Router in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info