602203

Linksys BEFSR41 Ver. 2 Manual

15
Zoom out
Zoom in
Previous page
1/66
Next page
EtherFast
®
Cable/DSL Routers
23
Instant Broadband
™
Series
22
3. Select Search for the best driver for your device (Recommended), shown
in Figure 6-2. Click the Next button.
4. Insert the driver disk into the floppy drive, and select Floppy disk drives
only, as shown in Figure 6-3. Click the Next button to start the search for
your driver.
Figure 6-2
Figure 6-3
Chapter 6: Installing the
BEFSRU31’s USB Port Drivers
Use the enclosed USB cable to connect your PC to the Router; the Type A end
connects to your PC’s USB port, while the Type B end connects to the Router’s
USB port. Now that all of the Router’s hardware is connected together, you
must enable the PC that will connect to the Router through its USB port.
Since your USB connection acts as an Ethernet adapter for your PC, there’s no
need for you to install an Ethernet adapter on that PC. Just follow the direc-
tions below to enable your PC’s USB connection to the Router:
• If you are running Windows 98, continue to the section below on this page.
• For other Windows operating systems, please refer to the appropriate section
in this chapter as listed in the Table of Contents.
You can also connect the Router’s USB port to other USB devices besides
USB-ready PCs, such as a USB hub using a USB cable.
1. With the Router powered up and connected to your PC’s USB port using a
USB cable, start up your PC in Windows 98, and have the Router’s driver
disk available.
2. Windows will notify you that it has detected new hardware, as shown in
Figure 6-1. Click the Next button.
Note: After you finish this configuration, make sure that TCP/IP is
installed on your PC(s). For instructions on installing TCP/IP, see
“Appendix D: Installing the TCP/IP Protocol.”
Installing the Windows 98 Driver
Figure 6-1
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFSR41 Ver. 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFSR41 Ver. 2 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info